Review of Dometic RV Vents and Fans - Ultra Breeze Black Trailer Roof Vent Cover - DMC38FR Video

We have just the thing. For you I recommend the MORryde RV Cargo Sliding Tray #MR74FR. The overall dimension of the tray is 72" x 20" and 6-5/8" tall. So this will fit nicely in your compartment provided it is al least…

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover part #DMC38FR is what I recommend for a Fan-Tastic Vent Roof Vent. It will allow the lid to be opened about 3/4 of the way which will be plenty for airflow especially if you have a model with…

I spoke with Dometic and their tech stated that the motor on your Fan-Tastic Vent Roof Vent 7350 #FV807350 will sense the resistance from the Ultra Breeze Cover #FVU1500WH and will stop to prevent the motor from burning out. So yes, Dometic does…

Hey Bernard, the hitch ball that comes with the Equal-i-zer #EQ37140ET does not come pre-installed onto the head of the system.

Covers like the Dometic Ultra Breeze Trailer Roof Vent Cover #DMC38FR you were looking at prevent vents from fully opening but come with a statement from the manufacturers that it's totally fine and that the vent still performs as it should even…

I went out to the warehouse and verified that the Dometic Ultra Breeze Trailer Roof Vent Cover #DMC38FR that we carry is a 1505 model cover with an interior width of approximately 17-1/4".

When using a vent cover like the #DMC38FR which does not allow the vent to open all the way, the motor will stop once it feels resistance and it will hold that position without any problems.

The dimensions of the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover part #DMC38FR are as follows: 19-1/2" Wide X 23" Long X 10-1/4" Tall

For your Fantastic Vent Model 6000A/6000BTA the Replacement Fan Motor Assembly Kit #FVK8017-00 that you referenced is the correct replacement.

Most WD shanks that fit a 2-1/2" receiver taper down to the normal 2" receiver size, just like the Equal-i-zer Shank #EQ90-02-4700. The only thing that you need to be sure of is that the mounting holes are in the same space. I have linked a…

The 18 inch long Equal-i-zer weight distribution shank part #EQ90-02-4600 does give most trucks and trailers the ability to tow with the tailgate down like it sounds like you are planning on doing and like what you see in the attached picture. Now…

The procedure for lubricating the hitch head is pretty simple. Place a pea-sized dollop of multi-purpose or bearing grease on the underside of the ball platform right next to the sockets. You'll also want to do the same thing on the under side of…