Review of Dutton-Lainson Trailer Winch - StrongArm Electric Winch With Remote - DL25010 Video

The Dutton-Lainson StrongArm Electric Winch w/ Remote #DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that…

I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part #DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.

The amount of cold cranking amps you need depends on how much you plan to lift/pull. The Badland Winch 2500 has an amp draw of 132amps at 2500 lbs, so any car battery should do. I would recommend including a charger in your setup. I recommend the…

You can use a pulley block like part #BDW20005, to pull your car on to a trailer with the winch being offset. You will want to make sure the winch is well secured for safety. This pulley block has a capacity of 17,000 lbs break strength and is…

This will depend on the exact boat loaded on the trailer but seeing the Keel Roller #CE29505 mounted where it is only makes it understandable the boat will rest on the roller when loaded. If your boat does not touch the roller please send me a…

There are two things the #DL25010 has that the #DL25001 does not. One is the hand-held remote with a 10' cord. The other is the spring-loaded clutch lever for releasing load with power. Outside of these two differences, the winches have all…

I checked with Dutton-Lainson and they do show that up to a 21 foot strap can be used with winch #DL15761. For a strap you can use #DL24251.

We have the Dutton-Lainson StrongArm Electric Winch #DL24870 that comes with a 7/32" diameter x 25' long steel stranded cable. This has the same 3,000lb load capacity as the StrongArm #DL25215 that you were looking at with the strap.…

The SuperWinch LT2000 Electric Utility Winch, part #1120210, you have referenced will only have a rated line pull of 2,000 lbs. The rated line pull of 2,000 lbs. will pull a rolling load of 10,050 lbs. up a 6 degree incline, but as the incline…

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

A wishbone harness will have 2 wires for running lights. On a trailer side 4-Way, the pin next to the ground pin is for the running lights. You can connect the 2 wires that carry the running lights together and then to the new connector. The running…

We do offer several disc brake kits for 5,200 lb axles. One of the disc brake kits I recommend is part #K2R526D. This is designed for axles up to 5,200-lb to 6,000-lb and has a 12 inch rotor with a 6 on 5-1/2 bolt pattern. This kit includes the…