Review of Dutton-Lainson - Trailer Winch - DL24059 Video

The Dutton-Lainson StrongArm Electric Winch, #DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the…

I went out to the warehouse to measure the Dutton-Lainson Angle Mounting Plate, #DL24059. The internal width of the U-bolt is 3-1/6 inches. The length is 5 inches. As long as the post is 3 inches wide by 4 inches deep, it will fit. I also spoke with…

I wasn't 100% sure which part of the Replacement Mounting Bracket #1500052559 you were thinking of as the width so I took some measurements and attached them on a photo for you to check out. If you're needing replacement hardware for the…

There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…

Since your boat trailer has rollers on it you can use the Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 which is rated for a 4,000-lb boat when no rollers are present. This boat winch has a high-impact weather-resistant case which makes it…

The Replacement Fairing Panel Fasteners for Thule Fairings #852-867-3001 are what I believe you are looking for on your fairing. These are the plugs that actually fit into the holes on your fairing to secure to the mounting brackets.

I have some great electric boat trailer winch options for you such as the Dutton-Lainson StrongArm Electric Winch which is what I recommend. These will need to be rated for about half the weight of the boat, so part #DL25215 for example (full…

The Dutton-Lainson StrongArm Electric Trailer Winch - Marine - 1,500 lbs #TW4015 requires a winch stand or mounting bracket. For the StrongArm you can use the Dutton-Lainson Mounting Adapter Plate for StrongArm Electric Winches #DL24055 if you have a…

The tow loops on the Curt Front Mount Trailer Hitch Receiver part #31180 are recovery points that you can hook a tow strap to like part #EM59700 and pull yourself out with if you ever get stuck. They are rated for 9,000 lbs each just like the…

I spoke to my contact at Dutton Lainson and they informed me that the Dutton Lainson Adapter plate part #DL24059 that you referenced is 7.7 inches long and 5.50 inches wide.

The Dutton-Lainson StrongArm Electric Winch #DL25215 doesn't come with a mounting plate but you can use part #DL24055 or #DL24059 if your current mounting bracket doesn't match with the mounting hole pattern for this winch (see attached).

The Dutton-Lainson StrongArm Electric Winch w/ Remote #DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that…