Recommended Pulley Block To Use With Offset Winch On Trailer
Question:
I need to off set my wench. Can I use a pulley to pull the center of the car? I am looking at a 45 degree off set.
asked by: Ted
Expert Reply:
You can use a pulley block like part # BDW20005, to pull your car on to a trailer with the winch being offset. You will want to make sure the winch is well secured for safety.
This pulley block has a capacity of 17,000 lbs break strength and is designed to be used with winches that have a rated line pull up to 7,000 lbs working load.
I have attached a drawing that shows how to attach a pulley when offsetting the winch.
I have attached a link to a product review video for this pulley you can check out.
Products Referenced in This Question
Bulldog Winch Snatch Block - Silver Zinc Coated
- Accessories and Parts
- Electric Winch
- Pulleys and Snatch Blocks
- Snatch Block
- Bulldog Winch
more information >
Product Page this Question was Asked From
Superwinch LT3000 ATV Winch - Wire Rope - Roller Fairlead - 3,000 lbs
- Electric Winch
- ATV - UTV Winch
- 1-Stage Planetary Gear
- 1.0 HP
- 2001 - 4000 lbs
- 11 - 20 lbs
- Slow - 0 to 4 fpm
- Plug-In Remote
- Wire Rope
- Superwinch
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Tow-Rax Battery Box - Polished Aluminum - 12" Long x 8-5/8" Wide x 10-7/16" Tall
- Video: Bulldog Winch Snatch Block BDW20005 Review
- Video: ComeUp Electric Winch CU881080 Review
- Video: Bulldog Winch Electric Winch BDW20049 Review
- Shop: Bulldog Winch Snatch Block - Silver Zinc Coated
- Q&A: Recommended Sway Control for 20 Foot Enclosed Trailer Weighing 7,000 lbs Loaded
- Shop: Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball
- Shop: Karrier ST225/75R15 Radial Tire with 15" Hi-Spec Aluminum Wheel - 6 on 5-1/2" - LR E
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM32684
- Shop: Snap-Loc Horizontal and Vertical E Track - Galvanized Steel - 2,000 lbs - 32" Long
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Q&A: Snatch Block to Use with Bulldog Winch part # BDW15020
- Q&A: Recommended Winch to Load 4,000 lb Tractor onto Flat Bed Trailer
- Q&A: Can ComeUp Snatch Block part # CU881080 be Used with 3/16 inch Wire Rope
- Q&A: Winch Capacity Needed To Pull 4000lb Vehicle Into Enclosed Trailer
- Q&A: Pulley Block Recommendation for Trailer
- Q&A: Hand Winch for a Car Trailer and 2000 to 3500 Pound Cars
- Shop: BOLT brand vehicle and hitch locks
- Shop: Nerf Bars - Running Boards
- Video: Tow-Rax Floor Jack Mount Review
- Video: Review of Snap-Loc E Track - Single 32 Inch Rail - SL27FR
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Shop: Gooseneck Hitch
- Video: Reese Friction Sway Control Kit Review
- Article: Finding the Right Electric Winch
- Search Results: pulley block
- Search Results: winch mounting plate
- Search Results: d ring
- Search Results: k71 303 00