TorkLift Battery Boxes TLA7735 Review Video

Hello Steven. The mounting studs that come with the #AKEBRK-35L-SA technically are removable. You would probably have to knock them out with a hammer or a rubber mallet if you want to remove them. These will bolt up to a standard 4 bolt brake flange,…

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

If I was using the Demco Kar Kaddy SS Tow Dolly #DM9713045 I would get a tarp like The Erickson Tarp #EM57026 to cover it from the rain and I would use a long cable lock #e98891 to loop through the wheel and onto the frame to prevent anyone from…

The TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7730 or the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7726 are ideal for the mount style and location you need. If you want a metal box, then I…

The #AKEBRK-35L-SA would be the left brake assembly and #AKEBRK-35R-SA would be the right side matching self-adjusting brake assemblies compatible with the 10 x 2-1/4 inch brake drums used on a typical 3500 lb axle. The price we charge for them is…

The Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange #23-105-106-09 is designed to work with 6000lb axles with the AL-KO/Hayes 4 bolt flange, and will more than likely not work with your 3500lb axle since it more than likely uses the standard 4…

You are going to have to trim out a section of your front air dam to install the Curt Hitch part #C31073 that is 3 inches wide by 1.50 inches tall. A similar amount of trimming is required for the Draw Tite hitch part #65064 as well. The other option…

For your 2018 Chevy Suburban the Curt Front Mount Trailer Hitch Receiver #C31073 and the Draw-Tite #65064 will both require air dam trimming. I've linked a couple photos to assist. The dimensions of the Curt cutout diagram is shown and then the…

The two mounting brackets included with the #329-HM300BKS battery box would fasten to the mounting surface, using the included screws (or suitable hardware of your choosing) and the straps would be threaded through. The battery box would be placed on…

For the dimensions you listed the Snap-Top Battery Box with Strap for Group 27 Batteries #329-HM327BKS would be a really great option as it has internal dimensions of 13-3/16" long x 10-1/8" tall x 7-3/16" wide.

Yes it will! The reason for that is the inside dimensions are 14-1/2 inches long x 7-7/8 inches wide x 9-3/4 inches tall for the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7727.

The MORryde Sliding Tray #MR49 will clear a lip height of 1-5/8 inches but if you have the need for a higher clearance we have the: MORryde Sliding Tray Height Adjustment Kit #MR34VR. This raises the tray 2-1/2", 2-13/16", or 3-1/8".