Review of Dexter Axle Brake Actuator - Surge Brake Actuator - DX27FR Video

The Dexter DX7.5L brake actuator part #DX27FR will fit on a 3 inch by 3 inch trailer tongue like what you have. Now it would be hard to say if it would bolt right up to existing holes that you have but either way you could drill new holes in the…

The Dexter #DX27FR would make a good replacement for trailers weighing less than 7500 lbs. The coupler is compatible with a 2 inch trailer ball, so if your trailer meets those criteria, the #DX27FR would be an excellent choice. UFP is now owned by…

The mounting holes for the Dexter DX7.5L A-60 Brake Actuator #DX27FR you were looking at are 3" apart on center.

I would be happy to help you. The Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs item #T4500600 you referenced is recommend to be mounted on a 3" wide tongue. It is an industry standard actuator and has an inside…

The length is 19 inches of the 7,500 lb Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball #DX27FR.

This is an excellent question Brad. The Dexter DX7.5L A-60 Brake Actuator #DX83FR is designed to bolt to a 3" wide by 5" tall frame while the Actuator #DX27FR is designed to bolt to a 3" wide by 4" tall frame. This is the only…

Yes the Dexter DX7.5L A-60 Brake Actuator #DX83FR can be installed on a trailer with a 3 x 3 inch trailer frame.

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout part #DX29FR for disc brakes and part #DX27FR for drum brakes use 1/2" diameter mounting hardware. We have used both grade 5 and grade 8 bolts when doing installations of them but the…

For a replacement I recommend the Dexter DX7.5L A-60 Brake Actuator #DX83FR. Your UFP GDC-70 is the same as the A-70, and this actuator is a direct replacement for the UFP A-60 and A-70. This fits 3" x 5" straight tongues and is designed…

You are correct, pushing the trailer with the #DM72VR uphill will cause the brakes to activate so this will be a problem. Typically you could add an electric lockout using the #DM5836, but since you are pushing it forward you would need some custom…

Not all hydraulic trailer drum brakes can be reversed without the brakes activating. If the trailer has brake assemblies that have free-backing plates then a reverse lockout solenoid is not needed. If your neighbor can back his trailer up without the…

The Replacement Solenoid Valve #T4748800 was specifically designed to be used on your Titan Model 6 coupler so I can guarantee it will work for you. We have had several customers do exactly what you are looking to do without any issue.