Review of Dexter Axle Brake Actuator - Surge Brake Actuator - DX33FR Video

The Dexter Zinc-Plated Brake Actuator #T47457007K does not have an access hole to insert a screwdriver to bleed the master cylinder. You will have to use the old method with a 2x4 and the safety chains. While the trailer is disconnected from the…

If you're getting that much bounce out of your trailer that would lead me to believe that maybe the MORryde IS suspension system is the actual issue. Typically if the suspension is too stiff you'll start to bounce. We see this issue a lot…

The mounting holes for the Dexter DX7.5L A-60 Brake Actuator #DX27FR you were looking at are 3" apart on center.

Thank you for all of the photos and information! From what I can see it looks like you have a #84 spindle but that inner bearing blew out so you should be able to remove that inner sleeve that looks like it's still on the spindle (next to where…

Dexter doesn't put reverse lock outs on their drum brake actuators so you'd need to add the part #DM5404 do a new actuator. The part #DX97FR is just the inner section of an actuator though. For the actuator you'd need the part #DX33FR.

The Dexter DX7.5L brake actuator part #DX27FR will fit on a 3 inch by 3 inch trailer tongue like what you have. Now it would be hard to say if it would bolt right up to existing holes that you have but either way you could drill new holes in the…

Yes, the Dexter Axle Brake Actuator Coupler part #DX56FR is good for towing a trailer up to 7,500 lbs so it would easily work on yours rated for up to 3,520 lbs. This will fit on a straight tongue that is measures 3 inches wide by 5 inches tall. This…

The closest option we have to replace your Atwood 82543 actuator is part #DM72VR, which is the item you referenced. However, this actuator doesn't have the lockout like your Atwood does. For a lockout use #T4748800 as an electric lockout. It…

Brake tubing is designed to be bent so as long as you don't go too crazy and bend the line so much that it weakens you could certainly bend the brake line when installing the Cargo Towing Solutions HydraStar Electric-Hydraulic Actuator #HBA16.…

Yes the Dexter DX7.5L A-60 Brake Actuator #DX83FR can be installed on a trailer with a 3 x 3 inch trailer frame.

Once the Demco Hydraulic Brake Actuator w Drop and Electric Lockout #DM8104311 is installed there isn't really an easy way to access that cylinder since this sits on top of the trailer tongue. Something else you might try doing is using a ratchet…

The Dexter brake actuator part #DX89FR that you referenced can be used with tandem axle disc brake trailers.