Demco Adjustable Trailer Coupler - Coupler Only - DM15791-81 Review Video

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

The bolts for channel mount coupler #CTA-280 have the markings for grade 8 bolts. They are 5/8 inch coarse threaded bolts so the minimum torque value is 159 and the max is 212 (foot pounds). Once torqued down the force will cause the metal of the…

To be able to lock the latch on the Demco Trailer Coupler - Adjustable Channel Mount #DM14976-52 you were looking at I recommend the Bulldog Easy Access Coupler Lock #BD580409.

Since the Demco Trailer Coupler #DM14040-81 that you referenced has a lock pin hole with a diameter of 5/16" and a minimum span of 3" for the pin lock, the BOLT Trailer Coupler Lock #BL7025285 that you referenced is compatible. The pin…

The Demco #DM12688-95 you've looked at would be a good choice. The 2 inch channel mount coupler is compatible with a 3 inch channel, and has bolt spacing of 2 inches on center. Demco is known for high quality products, you'll get years of…

Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…

The Demco Channel Tongue Trailer Coupler #DM16080-81 has a corrosion resistant powder coating that has a 500-hour salt spray rating, so it's been tested to withstand exposure to the elements up to a certain point. On top of the powder coating,…

I went out to our warehouse to take a look at the Buyers Products Straight Tongue Trailer Coupler #3370091562 you referenced and I measured a distance of right at 7/8" from the inside top of the coupler down to the center of the mounting holes.…

Your ProTECHtor is pretty old at this point and if it's constantly showing a red alarm light after resetting and there is no gas leaks then it is bad and would need to be replaced. Typically these need replacing at around 7 years. The Atwood RV…

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

For a 7/8 inch bolt to use with the #TREQ4541 we only have the part #TRFA71063 which is 4-11/16 inches in length. It may seem a little long but it would still work well. The wet bolts are just as strong as the non-wet bolts we carry.

The Demco 50-Degree A-Frame Coupler without Jack Hole part #DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.