Curt Squeeze Latch Channel-Mount Coupler Review Video

I do have an option for you but none of our free backing surge braking assemblies in this size have a parking brake feature. That said, we do have a surge brake assembly option with parking brake with the uni-servo backing plates, the Dexter…

The Demco 50-Degree A-Frame Coupler without Jack Hole part #DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.

For a pin lock that would fit the pin hole of the Curt Channel Coupler part #C25328 you could use the Adjustable Trailer Coupler Latch Lock part #e98883. Once installed this would prevent the latch from opening.

To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…

The Demco 6-Hole Adjustable Channel Bracket #DM66134 is pretty thick. The steel thickness used for this is 7/16 of an inch.

The Curt Class V Trailer Hitch, #C15398, will fit your 2014 Toyota Tundra SR5 Double Cab with the TRD package as long as your truck does not have a factory installed trailer hitch. The highest capacity trailer hitch that we carry for models with a…

For an LED replacement that is nearly identical to the Wesbar 105826 light you can use #STL36RB for the right side and #STL37RB for the left side. There are also versions that have a plug instead of just bare wires. For the right side use #STL36RPG…

What you describe isn't normal. Trailer axles are manufactured with a bow or crown in them, a slight arc with the high side on the top of the axle. When the trailer is loaded, the axle will straighten out so the tires make even contact with the…

I took a look at the Buyers Products 3 Position Channel and 5 Position Channel Bolt and Nut Kit #337B9020 that you mention, and this bolt is made from grade 8 steel, and has a shoulder length of 3-1/2", and an overall length of 4-1/2". I…

The overall width of channel mount coupler #CTA-280 where it attaches to a channel is slightly less than 3 inches to fit a 3 inch bracket such as #CTA-CB126 which has an inside width of 3 inches. I have linked videos of both of these parts for you.…

Ford didn't start equipping their trucks with the plug-and-play brake controller provision until the 1994 model year, so you'll need to hardwire the controller. This is a pretty simple process. First, you'll need to choose a controller. I…

In order to determine if the Rackem Double Barrel Trailer Tailgate Assist, part #RA-27C, will work with your trailer, you will need to measure the height and length of the trailer side rails. This unit will work on trailer side rails that are 10 to…