Customers compare 3370091550 to these similar products
Products Featured in this Video
Colin: Hey, everyone. It's Colin here at etrailer And today I'm going to show you guys these Buyers Products cast couplers. Now, I've got two of them right here. They come in two different sizes. Other than their size and weight capacity, they're going to have the exact same features. Right here on my lap, I have the two inch ball version.… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
When mounting a cast head coupler like Bulldog #BDA256C0317 to its mounting channel you will want to torque the mounting bolts to the specification indicated by the manufacturer in the instructions. The torque spec will vary from coupler to coupler.…
view full answer...I do have an option for you but none of our free backing surge braking assemblies in this size have a parking brake feature. That said, we do have a surge brake assembly option with parking brake with the uni-servo backing plates, the Dexter…
view full answer...I reached out to Lets Go Aero for confirmation that you can even use the Demco 50-Degree A-Frame Coupler #DM15349-52 and they said that you will not have any structural issues with having the bolt holes drilled in the sides of your Frame as the Demco…
view full answer...The Demco 6-Hole Adjustable Channel Bracket - Weld On - 12" Tall - 21,000 lbs #DM66134 is the weld on option for your trailer. There isn't a complete kit we offer, but it sounds like you are seeking the Demco 50-Degree A-Frame Coupler…
view full answer...Yes, you will be able to use the Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Zinc - 2-5/16" Ball - 12,500 lbs #D05557-95 with the Demco 50-Degree A-Frame Coupler #DM15349-52. The #D05557-95 is for 3" wide channels and has…
view full answer...All of the A-frame couplers we carry are for the standard 50 degree A-frames. What you could do, since your A-frame is a lower angle, is have some steel spacers welded on to get to 50 degrees and then use a weld-on coupler. I have linked the weld-on…
view full answer...I looked up pictures of your trailer and it looks like the wheel you need is the part #AM20539 which is a 15 inch diameter wheel that is silver with a 6 on 5-1/2 inch bolt pattern like I believe your wheel has. If instead you needed a 5 on 4-1/2 inch…
view full answer...We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…
view full answer...Using a 60/40 ratio is a great place to start when deciding where to place your axle, placing 60 percent of the weight in front of the axle. However, there are a couple other factors that come into play. I have attached a photo that outlines that…
view full answer...Best option we have is the part #e98887 for a pin lock for the Demco coupler part #DM15000-52. This has a pin diameter of 1/4 inch and a length of 2-1/2 inches so it will fit tight to your coupler and fit well still.
view full answer...The eZ latch of the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K #DM16680-52 is absolutely just as safe as a slide lock coupler. It doesn't use a pin but still exceeds the SAE J684 safety…
view full answer...The modern tire size equivalent to the size 18.5x8.5-8 is the size 215/60-8 like the #AM3H325 which has the same bolt pattern you have too of 5 on 4-1/2 inch. This is a Load Range D tire as well. I attached a review video for this for you to check…
view full answer...