Recommended Coupler Lock For Demco Trailer Coupler DM14976-52

Question

Question:

What locks do you sell that will fit to lock this trailer coupler you sell. thanks.

asked by: Jeff

0

Expert Reply:

To be able to lock the latch on the Demco Trailer Coupler - Adjustable Channel Mount # DM14976-52 you were looking at I recommend the Bulldog Easy Access Coupler Lock # BD580409.

expert reply by: Samuel C

0

Answer 1

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 2

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

view full answer...

Answer 3

The Demco Trailer Coupler #DM14976-52 has a 5/16" hole through the side of the coupler that will accept a lock. Our etrailer Surge Brake Coupler Lock #e98888 will allow you to prevent the coupler from being disconnected easily from your…

view full answer...

Answer 4

The most similar coupler lock we have to the #BLTL-20 that would fit the Demco coupler #DM14976-52 would be the Fastway part #FA86-0015-316 which fits into the coupler and has a bar that runs across the top of it but since it has a little more…

view full answer...

Answer 5

The Bulldog Collar-Lok Adjustable Channel Mount Coupler part #BD028657 uses 5/8" diameter hex head bolts with a grade 5 rating. If you need these, we have the 3 Position Channel and 5 Position Channel Bolt and Nut Kit part #337B9020 which…

view full answer...

Answer 6

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…

view full answer...

Answer 7

The Demco 50-Degree A-Frame Coupler without Jack Hole part #DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.

view full answer...

Answer 8

The Ultra-Fab #UF21-001095 wheel chocks are made in China. If you'd prefer a chock manufactured in the US, I'd recommend the #337WC24483 from Buyers Products. If you click the provided link, you can see a video of my buddy Randy demonstrating…

view full answer...

Answer 9

Hi Ed, If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler #DM15000-52 you were looking at would be a compatible fit. I've…

view full answer...

Answer 10

The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.

view full answer...

Answer 11

Tow Rax states that the capacity for the Tow-Rax Low-Profile Floor Track #TWSP72TA is based on the attachments that are used in it. So in your case you'd just be limited by the capacity of the anchors you installed in the track. The amount of…

view full answer...

Recommended Coupler Lock For Demco Trailer Coupler DM14976-52

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching