Review of Titan Adjustable Trailer Coupler - Coupler for 2-5/16 Ball - 074-353-00 Video

It sounds to me like you are wanting to power the dump trailer directly from your trucks battery. If this is the case you will want to start by making sure that the power draw for the lift would not overload the truck. If all looks good, you could…

I have included a picture here of what the Titan Bolt-On, Straight Tongue Coupler #T4855300 looks like.

I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to…

It sounds like you're looking for the distance from the center of the hitch pin hole to the center of the ball on the Curt Adjustable 2-Ball Mount #C99NR. That measurement is 12-1/4".

The Curt Adjustable 2-Ball Mount #C99NR uses Pins #C56NR which are 3/4" in diameter and have a usable length of 3-3/4". You will need the InfiniteRule Lock #IR36FR which is also 3/4" in diameter with a 3-7/8" span to lock the…

The Demco 6-Hole Adjustable Channel Bracket #DM66134 is pretty thick. The steel thickness used for this is 7/16 of an inch.

There sure is; Titan is actually Dexter now, but there is a 6-hole weld-on bracket that you can use with the coupler. The exact parts you need are as follows: - Dexter Bolt-On Coupler for 2 5/16" Ball - Primed - 21K #T4855300 - Demco 6-Hole…

Trailer couplers are not rated for tongue weight capacity. They are rated for Gross trailer weight, as long as the gross trailer weight is within the capacity of the coupler, the coupler is installed properly and the trailer is designed properly, the…