Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
Cast ball coupler is made of sturdy steel and has a durable silver powder coat finish. Composite eZ-Latch ensures fast, easy, secure hookup and disconnect. Adjustable channel bracket and mounting hardware sold separately.
Features:
Specs:
Note: (4) 5/8" Grade 5 mounting bolts must be used to achieve the 21,000-lb weight capacity
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the handle and the coupler socket will automatically release its grip on the ball.
The contoured, low-profile design of the latch handle helps protect the coupler from damage by allowing any potential hazards - from debris on the road to your ball mount backing into the coupler - to simply slide over the top. This helps prevent anything from getting under the latch handle and releasing the ball, and it can also limit any damage to the coupler should an impact occur
Unlike most couplers, which have a pin hole on the handle latch, the eZ-Latch coupler features a hole on the side of the coupler itself. Inserting a coupler lock through this hole will keep the latch from lifting, preventing disconnect and theft.
Made of sturdy steel, this coupler features a durable silver powder coat finish that is designed to limit rust and corrosion. This finish has a 500-hour salt spray rating, making the coupler perfect for marine use.
The eZ-Latch's sleek, ergonomically designed handle is constructed of an impact-resistant polymer-nylon-resin compound that provides the flexibility and strength needed to bounce back from a collision. The handle is corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Demco trailer coupler. This is gonna provide the connection point for your 2 5/16 inch hitch ball so that you can tow your trailer with your tow vehicle. This does have an easy latch mechanism that's going to ensure a nice, simple and secure hookup and disconnect. So rather than all the hassle that you ordinarily have to go through to get connected, this is going to allow you to hook up. With the latch in the closed position, you just drop the coupler over the hitch ball and the latch will snap into place and you've got a nice, solid connection onto your hitch ball there.
And then to disconnect, you just simply lift up that latch, and we'll pull right off. So very simple operation to make sure that you're gonna have a nice and secure connection. This is made in the USA of a cast steel construction, so it is gonna be very durable for you. It's gonna provide a weight capacity of 21,000 pounds and it is SAE J684 certified, so you can trust it is going to hold up well and do a good job for you. It does have this silver powder coat finish.
It's gonna offer excellent corrosion resistance. It has a 500 hour Salt Spray rating, so it is gonna be great for your marine applications if you're wanting to put it on your boat trailer and that sort of thing. The latch handle does have a nice, low profile design, and it is constructed of a durable polymer nylon resin composite. And so it is going to be corrosion proof and impact resistant, so it will hold up well as well. I'll give you a few measurements here.
So you can see our overall length, we're looking at just over eight inches, we'll call it 8 1/8 of an inch long. Our width is just shy of three inches. We'll say 2 7/8 of an inch wide. So this is going to very easily bolt into a three inch-wide adjustable channel bracket so that you can change your couplers height depending on the height of your trailer so that you can make sure your trailer's gonna be riding level. The channel bracket and the mounting hardware are sold separately.
You can find those both here at etrailer.com. We do also have the option, we've got this little pinhole here that is 3/8 of an inch diameter pinhole that you can pass a locking pin through if you want to lock this onto your ball and make sure that no one can come along and easily disconnect and take off with your trailer, that sort of thing. That 3/8 of an inch diameter lock pinhole, you will need a minimum span on your lock of three inches to clear that so that it will connect on either side of the coupler there. So just an idea for some extra security. Again, that is sold separately as well. And so you would have to purchase that here at etrailer if you're wanting to add in that extra security feature. But if you are looking for a very simple way to get your trailer connected to your 2 5/16 inch ball, then this is gonna be a great way to go. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (518 Customer Reviews)
Cast ball coupler is made of sturdy steel and has a durable silver powder coat finish. Composite eZ-Latch ensures fast, easy, secure hookup and disconnect. Adjustable channel bracket and mounting hardware sold separately.
I have been using this on my 15,400# trailer since purchased no issues.Easily locks and unlocks .
Best trailer hitch for the price, Very solid and easy to use and makes hook up a breeze. Highly recommended
The coupler came quickly and fit perfectly. So much better than the original.
I will make sure all my trailer business will go to etrailer.
Replacing a sloppy 21K pintle with this hitch, pintle came with a trailer I bought used so this will be a quiet replacement to pair with my B&W Tri-ball I bought a couple years ago with etrailer.
Trailer coupler was easy to install,
fits over tow ball and locks with ease.
I’ve ordered other trailer parts from E Trailer and they always have shipped quickly and parts have always been what’s specified on their website.
And their videos are very helpful when ordering parts.
I highly recommend ordering parts from this company.
Size, fabrication is great. Easy installation and function is very good. Should last and last.
This hitch bolted right up and works gr eat
Great quality coupler, easy hookup and release.
I bought this coupler to replace my old rusty one. Coupler fit perfectly. Very happy with how this works!
Quick shipping and quality product
Awesome coupler!!! Lookin for a robust coupler…. Look no further!
The coupler that came with our teardrop did the job, but getting hooked up and secure on the ball was a real pain that would take multiple attempts to reposition it before it dropped fully in place. I like the Demco eZ-latch. So much better. I uploaded 3 photos: 1) original coupler, 2) trailer frame with new holes drilled and old holes filled with Bondo, 3) Demco coupler in place. The changeover was very easy.
Do you have a question about this Adjustable Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe D.
1/24/2022
It continues to perform like it was new. I will never have a trailer without one!