etrailer Adjustable Channel Mount Trailer Coupler Review Video

The Reese Strait-Line system should be chosen according to your loaded tongue weight. Ideally you want your actual tongue weight to fall in the middle of the tongue weight range of the weight distribution hitch. Since your dry tongue weight is…

A little bit of play between the coupler and the channel is normal. As long as the bolts are properly torqued, the play won't damage or harm anything. We've confirmed this with our channel mount coupler manufacturers like Bulldog and…

I am happy to answer the questions you have on the Curt 3-Position Adjustable Channel Bracket #C48610. The bracket is made of forged steel, it is 1/4" thick, and the holes are spaced 2" apart on center. For a coupler you can use the…

The overall width of channel mount coupler #CTA-280 where it attaches to a channel is slightly less than 3 inches to fit a 3 inch bracket such as #CTA-CB126 which has an inside width of 3 inches. I have linked videos of both of these parts for you.…

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed…

To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…

I pulled the Titan Trailer Coupler #T4845000 and the repair kit from our warehouse. I produced a short video for you showing how to reassemble the Titan #T4845000. Also linked is an FAQ on trailer couplers.

To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

For your double eye springs that are 25-1/2 inches, it is likely your hangers are 29-1/2 inches apart on center and your springs most likely were originally 25-1/4 inches as they will stretch slightly over time. For instance if you were to use 25-1/4…

The bolts for channel mount coupler #CTA-280 have the markings for grade 8 bolts. They are 5/8 inch coarse threaded bolts so the minimum torque value is 159 and the max is 212 (foot pounds). Once torqued down the force will cause the metal of the…

The fact that it is staying on even when the trailer is not connected is strange. According to the installation details linked for reference, if the trailer is connected to the tow vehicle, the yellow charging light will always be on. The light stays…