Deka Wiring DW04914-1 Review Video

To install a controller in your Dakota, you will need the controller, the #ETBC7 install kit, and a functioning 4-pole trailer connector. If your Dakota does not already have a 4-pole connector, one can be installed by using part #118323. If you do…

The Deka 16/4 Wiring #DW03240-1 you were checking out is actually annealed bunched copper wire strands.

On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…

Light truck tires (LT) are sometimes used in RV applications but generally not on utility trailers. Light truck tires are a type of passenger vehicle tire and as such they are not built with as thick of a sidewall as trailer tires. A thicker sidewall…

I attached a picture for you to use as a guide for wiring in your trailer's 4-way wiring to a 7-way socket connector. The yellow wire is the left turn/stop circuit that you have out of the connector.

Unfortunately not all people will use the standard wiring colors when wiring up a trailer connector. This happens pretty frequently and the solution is to first determine what the wiring is and then wire by function according to the attached diagram.…

Yes, the center pin on trailer side wiring harness #H20046 is for reverse lights on the trailer. For this particular harness it is the yellow wire. But it will only work if the center pin is functional on your 2012 Toyota Tacoma. If you have the…

Your main problem is an insufficient ground for the trailer wiring. Try improving the connection of the main ground wire of the trailer wiring harness. Make sure it is attached to a clean metal surface. Or you can run all of the trailer wires back to…

There isn't really a lot of differences between the Hopkins 7-Way RV Style Connector with Molded Cable - 8' Long - RV Standard #H20046 and Hopkins 7-Way Blade Style Connector with Molded Cable - 8' Long - Auto Standard #HM20041. Both are…

There are standard colors for trailer wiring, but not everyone will follow those guidelines and since your trailer is older it is likely that the colors are different. The best way to wire up your trailer with this 7-Way Molded Trailer Wire Connector…

It sounds to me like you are experiencing the hyperflashing phenomenon that can occur with LED lights. In this case I recommend wiring in load resistors, like part #ALEDRST1B, to the left turn, right turn, and running light circuits of your trailer.…

Try improving the connection of the main ground wire of the trailer wiring harness. Make sure it is attached to a clean metal surface. Or you can run all of the trailer wires back to the main ground. This is actually the ideal solution. But you can…