How to Release Tension on Weight Distribution Spring Bar So That Bar Can Be Removed
Question:
We have just purchased a trailer with Reese sway bars and after backing into our spot, we are unable to disconnnect the bar on the right side. How do we release the tension? thank you for any info!
asked by: Terry
Expert Reply:
If you are speaking of a weight distribution system that utilizes spring bars that are held in tension by chains hanging from the trailer frame, the easy way to take the tension out of the spring bar is to use the trailer jack to raise the trailer. Leave the trailer hitched to the vehicle, and use the jack to raise both the front of the trailer and the rear of the vehicle until the chain has enough slack in it for the chain hanger to be lowered. Make sure that the vehicle and trailer are inline, and the trailer is not at an angle to the vehicle. At that point, the spring bar should be easy to remove from the weight distribution head.
Product Page this Question was Asked From
Reese Weight Distribution w/out Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Curt Trunnion Style Weight Distribution System w/ Shank - 1K TW, 10K GTW
- Shop: Reese Weight Distribution w/out Shank - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Shop: Replacement Ball and Plate Assembly for Curt Friction Sway Control System
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW
- Search Results: sway control only
- Search Results: weight distributing hitch
- Video: Review of CURT Weight Distribution Hitch - 1K TW MV WD With Sway Control - C17062
- Q&A: Comparing Blue Ox 2-Point and Curt TruTrack 2P Weight Distribution Systems for a FR Wolf Pup 17JG
- Video: Review of Curt Weight Distribution Hitch - WD With Sway Control - C69JR
- Article: How to Measure for Trailer Hitch Drop
- Video: Curt Trailer Hitch Ball Mount Review C45070
- Shop: Transmission Cooler
- Q&A: How to Ease Attaching and Removing Spring Bars on an EAZ Lift Elite Weight Distribution Hitch
- Q&A: How to Remove Round Spring Bars Stuck on Head of Fastway e2 Weight Distribution System
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: How To Disconnect Tow Vehicle From Camper with Weight Distribution System After Camper is Parked
- Q&A: Straight Channel Trailer Coupler for 2-5/16-Inch Hitch Ball
- Q&A: Latch Repair Kit For Bulldog A256 2-5/16" Ball Latch Coupler
- Q&A: What is the Difference Between Load Range B and C Trailer Tires of the Same Size
- Search Results: trailer coupler repair
- Search Results: coupler repair kit for 2 5 16
- Search Results: weight distribution hitch
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: hitch