Customers compare C69JR to these similar products
Products Featured in this Video
Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this CURT TruTrack weight distribution system with the two-point sway control, the seven-hole adjustable shank, and a 10,000 pound gross towing weight capacity. Now, this weight distribution hitch will create a more stable ride for your tow vehicle and trailer. Adding these spring bars to your towing system applies… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thanks for the picture! The Curt TruTrack 2P Weight Distribution System w/ Sway Control item #C69JR will work with your 7,000 lbs Jayco 267BH. The Curt TruTrack has an 800 lbs to 1,000 lbs tongue weight range. The built in sway control will help to…
view full answer...Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…
view full answer...Based on the weight of the 2022 Grand Design Imagine XLS 23BHE I was able to find online the Curt TruTrack weight distribution system part #C69JR would be a great option. With that said it seems to weigh more than what your truck is rated for so…
view full answer...No, Lippert does not sell or make available only the top portion of the Wi-Fi and Hotspot Kit for Lippert OneControl Hotspot Prepped RVs #LC35UD. If part of it sheared off you do need to purchase a whole kit.
view full answer...I went ahead and confirmed with my contact at Curt that the spring bars on the Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank #C69JR are 35" from end to end. I went ahead and attached a diagram of this measurement for…
view full answer...Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…
view full answer...The chain lift brackets that come with the Curt MV Weight Distribution System #C17052 have a single 1/2" bolt that is used to secure the bracket to your trailer frame. The instructions call out to turn the bolt until it makes contact with your…
view full answer...The Curt MV weight distribution part #C17051 has a tongue weight max of 800 lbs and trailer weight max of 8,000 lbs and has tabs on it's head that allow for it to be used with friction sway control like the #17200.
view full answer...The Equil-i-zer Weight Distribution with 4-Point Sway Control, like #EQ37041ET, differs from the Fastway e2 Weight Distribution with 2-Point Sway Control #FA92-00-0450, because it does utilize 2 more points of steel-on-steel friction at the head of…
view full answer...The L-brackets of the Reese weight distribution system #RE44FR need to install between 24.5 and 27.5 inches from the hitch ball center. I attached a picture that I took from the instructions that shows this. The range gives you a bit of flexibility…
view full answer...The owner's manual for the 2014 Ford F-150 only shows the gross combined weight rating which is the most that the truck and trailer can weigh together. So I checked the towing guide from Ford for the 2014 model year. Capacity is also dependent…
view full answer...If you have a compatible 2-5/16" ball and shank already from your #C69JR, the replacement you need is the Curt TruTrack 2P Weight Distribution System w/ Sway Control - No Shank #C79JR. This comes with everything you need in order to mount the…
view full answer...