CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10400G Review Video

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

You want to locate the rollers on the frame of your trailer so that they overhang slightly off the back of the trailer so that the boat will contact them before any other portion of the trailer as you load it onto the trailer. I attached a picture…

Yes, you can go with hub #AKIHUB-545-2-G-1K since it uses the same bearings and seal size as your regular hub #AKIHUB-440-2-G-1K. Keep in mind that you will also have to switch to wheels with the 5 on 4-1/2 bolt pattern. I would assume you are…

The speed rating for the Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C part #AM30130 is 65 mph.

Trailer tires actually don't typically wear out from mileage. Normally it's age that does them in as trailer tires begin to dry rot and become unreliable between 4 and 6 years of age. Instead of trying to track mileage on your tires you'd…

Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part #CE27710 installed. For a set of swivel…

The Taskmaster tires are huge sellers for us. Reason being they are priced great, they have proven to be reliable, and they have higher speed ratings than most trailer tires as they are rated for up to 81 mph and most trailer tires are only rated for…

I have a solution for you, but since the center to center space of the mounting slots on the CE Smith Deep V Keel Roller, 5 Inches #CE10401G measures 3 inches, the roller will not mount to your 3 inch wide trailer frame. There will not be enough room…

For your Ford truck with factory pucks, you will need to use an adapter like the Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package #DM6175 or the Reese Elite Series Underbed Rail Adapter #RP30156. Either of these options will…

I went to our warehouse and measured the CE Smith Spool Roller Assembly for Boat Trailers #CE32100G. It measures 2-1/4-inches from the bottom of its mounting plate up to the center of the rubber roller. Overall width is 5-inches and overall height is…

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

The CE Smith Keel Roller Assembly for 2-Inch Wide Trailer Tongues, part #CE32005G, has multiple mounting holes to allow it to fit on a 2-inch trailer tongue at any of 4 or more different heights depending on how it is oriented. Please refer to the…