Mounting Height Range for CE Smith Keel Roller Assembly # CE32005G for 2-Inch Wide Trailer Tongues
Question:
Hi, could you tell me the lowest two heights this bracket can be adjusted to on a 2x2 tongue. I need to see if either of these two heights are comparable to an existing fixed position welded on bracket when it comes to roller height to the flat area in the middle of the roller.Thanks,
asked by: Dave
Expert Reply:
The CE Smith Keel Roller Assembly for 2-Inch Wide Trailer Tongues, part # CE32005G, has multiple mounting holes to allow it to fit on a 2-inch trailer tongue at any of 4 or more different heights depending on how it is oriented.
Please refer to the attached image which shows two photos of this part mounted in two different height positions on a 2-inch tube (which represents your trailer tongue).
When mounted in the lowest position (please refer to the photo on the left) and angled so that the two mounting bolts both contact the tubing, the top center of the keel roller will be approximately 4-1/2-inches above the top surface of the tubing. When in the second lowest position the top center of the keel roller will be approximately 5-1/4-inches above the tubing.
The included video will also help illustrate the manner of attachment and resulting roller heights.
This CE Smith Keel Roller Assembly comes complete with pre-installed roller, two brackets and two sets of mounting bolts and lock nuts.
Product Page this Question was Asked From
CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Boat Trailer Parts
- Rollers
- Keel Roller
- 11-1/2 Inch Tall
- Black Rubber
- 4 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Search Results: bow roller assembly
- Q&A: Does CE Smith Keel Roller Assembly Freely Spin
- Shop: CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4"
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32005G Review
- Q&A: Can 4 Foot Bunks be Used in Place of 3 Foot Bunks on a Boat Trailer
- Q&A: How Tall is the CE Smith Offset Spool Roller Assembly, # CE32150G.
- Q&A: Height from Mounting Surface to Top of Roller of CE32100G and CE32150G
- Shop: CE Smith Keel Roller Assembly for 3" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30040 Review
- Article: Measuring a Trailer Tire
- Search Results: bow roller
- Search Results: roller bar
- Search Results: roller bunk
- Search Results: roller bracket
- Search Results: boat trailer
- Search Results: roller
- Video: CE Smith Boat Trailer Roller Bunks Water Test
- Video: CE Smith Bolster and Swivel Bracket Assemblies Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32150G Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10003G-4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Shop: CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Shop: CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 5"
- Q&A: Roller Assembly for 2 Inch Wide Trailer Tongue
- Q&A: What Prevents Jet Ski From Rolling Forward Off of Jet Ski Trailer with Roller Bunks
- Q&A: Keel Roller Assembly to Fit 3 Inch Wide Trailer Tongue on 2004 McClain Boat Trailer
- Shop: Brake Controller