Review of Blue Ox Hitch Adapters - High-Low Adapter - BLU48CR Video

I had to reach out to Blue Ox for the measurements on the Adjustable Drop Hitch Receiver Adapter #BLU48CR. From the center of the hitch pin hole to the start of the gusset they said it is 4.7" and to the back of the vertical section is…

The Add-On Receiver for Blue Ox Adjustable 2" Drop Hitch Receiver #BLU94TR has a towing capacity of 10,000 lbs and a tongue weight capacity of 1,000 lb.

It sounds like you are looking for the Add-On Receiver for Blue Ox Adjustable 2" Drop Hitch Receiver item #BLU94TR. This will work with the Blue Ox Adjustable Drop Hitch Receiver Adapter item #BLU28XR you were looking at.

The Blue Ox Adjustable Drop Hitch Receiver Adapter #BLU34TR extends the receiver out 13-1/2". Do understand this adapter is only able to be used with tow bars for flat towing a vehicle.

We have one solution that will work well, but you'll need to have a 2-1/2 inch hitch installed on your tow vehicle. The Brophy hitch extender part #HR26 is a 7 inch extension with a capacity of 10,000 lbs so it would work well.

The distance is 6 inches from the center of the hitch pin hole to the beginning of the gusset for the Blue Ox adapter, which is the following part number: - Blue Ox Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 8" Rise/Drop - 10,000…

Brophy hitch extender and reducer #HR26 is indeed rated for use with weight distribution. When used with weight distribution this reducer is rated for 10,000 pounds gross trailer weight and 1,000 pounds tongue weight. However, the use of this…

The Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" #RM-071-1075 has a maximum tongue weight of 400 pounds. The tongue weight is the downward force that the trailer exerts on the hitch. If you are looking for the…

I do have a solution for you, however I do not recommend using the Roadmaster Dual Hitch Receiver #RM-077-10 in conjunction with the High-Low Adapter #RM-048-10 that you already have. Using an adapter with another adapter like this will cause a…

The Gustafson RV Puck Light #277-000343 can be used with a dimmer switch but the dimmer switch needs to be designed for use with LEDs. Otherwise if you use a non-LED dimmer when you go to dim the lights they might flash and make a weird noise at the…

I wasn't able to find any model information on your Sunlink RSBF3NN-008 and we don't carry that particular brand, but we do have a number of recessed puck lights available that may work for you. You may be able to use the Gustafson RV Puck…

Yes, the perfect solution for you is the B&W Tow & Stow 2-Ball Mount #BWTS20066BMP, which is specifically designed to work with the GM MultiPro Tailgate. As you can see int the attached photo, the angled design provides clearance for the…