Recommended 2" Add-On Receiver for a Blue Ox Adjustable 2" Drop Hitch Receiver

Question

Question:

Hello, Blue Ox has a 2 1/2 Receiver Add BLU44TR and I’m looking for a 2” Receiver Add for my shank. Thanks

asked by: Kevin D

0

Expert Reply:

It sounds like you are looking for the Add-On Receiver for Blue Ox Adjustable 2" Drop Hitch Receiver item # BLU94TR. This will work with the Blue Ox Adjustable Drop Hitch Receiver Adapter item # BLU28XR you were looking at.

expert reply by: Jerred H

0

Answer 1

I don't have a way to add a second receiver to the Blue Ox Adjustable Drop Hitch Receiver Adapter part #BLU28XR but if you like the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part #325-GH-214 option, there's another more…

view full answer...

Answer 2

We do not offer replacement parts for Dexter 2,000 lbs brakes only the complete assemblies like item #23-47-48. As far as cleaning goes you will want to wipe out all of the old grease and build up of dirt and any other debris. Getting all of the…

view full answer...

Answer 3

The Kuat Pivot 2 item #PVP20B will extend out an additional 12-3/16". This is the hitch pin hole to hitch pin hole distance. I have linked a diagram below with a bunch of measurements of the Kuat Pivot 2.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

Hey Ken, we have had customers in the past use the etrailer Trailer Hitch Receiver #e89YR with their Escape Hybrid PHEV. I'm not 100% sure why we have it listed as a no fit, but I'd imagine it's because of the EVAP box, but everything…

view full answer...

Answer 7

Hi Blake, The Brake Buddy Classic 3 #HM39494 can pull up to 15 amps at 12 volts so you'd be looking at a maximum draw of 180 watts.

view full answer...

Answer 8

To install a Roadmaster base plate on a 2023 Ford Escape PHEV, you will want the Roadmaster Direct-Connect Base Plate Kit item #RM77GR. I checked with Roadmaster and this base plate has been confirmed to fit the Hybrid and Plug-In Hybrid models. I…

view full answer...

Answer 9

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 10

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 11

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 12

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Recommended 2" Add-On Receiver for a Blue Ox Adjustable 2" Drop Hitch Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching