Trailer Hitch For A 2022 Mercedes-Benz GLC 300

Question

Question:

What should I get for a trailer hitch to pull my boat. 16ft 8in V hull 3G Yamaha fishing boat

asked by: Eugene L

0

Expert Reply:

Though The Curt Trailer Hitch Receiver # C13315 is not confirmed to fit your 2022 Mercedes-Benz GLC we do have a few trailer hitches that would work for you.

If you have the SUV-GLC300 you will need The Curt Trailer Hitch Receiver # C84ER. This trailer hitch has a bolt-on installation with no welding required. It has a gloss black power coated finish that is over a protective base coat that offers a superior rust resistance.

The trailer hitch has a maximum gross trailer weight up to 6,000 pounds, and has a maximum tongue weight up to 900 pounds. I recommend checking your vehicle's manual to find out the proper towing capacity for your vehicle.

If you have the Couple GLC300 you will need The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH64GR.This hitch has a simple bolt-on installation with no drilling or welding required. It also has a black powder coated finish that offers a superior rust protection.

The trailer hitch has a maximum gross trailer weight up to 3,500 pounds and has a tongue weight up to 350 pounds. Again check your manual to see the actual towing capacity of your vehicle.

If you have the SUV version you will also need The Curt Vehicle Wiring Harness # C56496. The Couple version's hitch has the wiring already included.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

Curt 2-inch hitch #C13190 is a confirmed fit on your 2015 Mercedes-Benz GL550 so long as it does not have the Active Curve System. This hitch is rated for tongue weight (TW) of up to 900-lbs and for trailer weights up to 7500-lbs. According to my…

view full answer...

Answer 2

In order to install the Curt #C13190 some trimming will be required in addition to the bolt-on installation. A section of the heat shield will need to be trimmed that is approximately 11" x 6" and also the outboard tabs on each side of the…

view full answer...

Answer 3

Having the 4-way run out of the back hatch is actually the preferred method although it seems like it wouldn't be. Having the 4-way stored inside the cab of the keeps it protected from rain and moisture to prevent corrosion and keeps it protected…

view full answer...

Answer 4

The Curt trailer wiring part #C56496 is the confirmed trailer wiring recommendation for a 2014 Mercedes GLK like so it would be a great option if you are looking for trailer wiring. This is a universal type kit that will require hardwiring to the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...