Trailer Hitch and Wiring for 2015 Mercedes-Benz GL550
Question:
Recently purchased a 15’ GL-550 4matic. The vehicle was not equipped with a hitch/towing package. We replaced the vehicle from a Suburban as we do a lot of towing such as enclosed snowmobile trailers etc 5,000+/- ish. Salesmen checked with the service felt they told him it be more cost effective to go aftermarket and have a local hitch place do it...for a grand. We took his word for it and bought it. Now I’ve done some research and I have the following questions with a Curt hitch. 1. Will the anti-sway control work if i purchase a curt hitch and wiring harness? I’ve read issues with the SAM unit? Will the vehicle recognize I’m pulling? 2. does the curt hitch stick out so you see it? The factory units are hidden under the bumpers from what I gathered. The dealer wants $3,000 to do a factory one....$1,050 for the hitch and 2k labor to run the wires and install. Yikes! Another concern is vehicles that come not equipped with a hitch from the factory does that mean no transmission cooler?
asked by: Augie
Expert Reply:
Curt 2-inch hitch # C13190 is a confirmed fit on your 2015 Mercedes-Benz GL550 so long as it does not have the Active Curve System. This hitch is rated for tongue weight (TW) of up to 900-lbs and for trailer weights up to 7500-lbs. According to my research the vehicle itself shares this 7500-lb towing capacity. Install instructions are linked for you.
This hitch will not offer the exact same appearance as a factory hitch; the cross tube will be visible as you can see in the photo from the instructions that I linked for you. Also do please note this hitch is NOT rated for use with a weight distribution/sway control hitch system like # EQ37100ET. If you are referring to aftermarket anti-sway bars made for the car I cannot confirm compatibility since hitch makers do not test fit their hitches with all of the available aftermarket products.
You can find out the specific equipment that was installed at the factory, such as a transmission cooler, by having a dealership run the car's VIN. This will tell them all the factory equipment on it. There is no standard definition for what is included in a vehicle's "tow package". For some autos that may be a hitch only, or a hitch and wiring only, or both of those things plus a supplementary transmission cooler. It depends on the specific auto maker and vehicle so your nearest dealership can be consulted for clarification.
A defective signal acquisition module (SAM) can cause issues such as the fuel gauge or lights not working, fuses blowing or battery drain, among other reported issues. I am not aware of problems with this optional feature caused by installation of an aftermarket hitch.
The wiring harness we recommend for your GL550 does not directly connect to the car's wiring. The ZCI 4-pole wiring kit # 119250KIT recommended simply clamps over the car's wiring and detects the required signal with magnetic sensors. You may also care to use our Ball Mount Kit # 989900 which includes two ball mounts, two hitch ball sizes and a pin and clip.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 7500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt Trailer Hitch Receiver Installation - 2018 Mercedes-Benz GLS-Class
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: hitch trailer
- Q&A: Trailer Wiring Recommendation for a 2014 Mercedes GLK
- Q&A: Are Alterations Necessary to Install Curt Trailer Hitch Receiver on 2014 Mercedes-Benz GL450
- Q&A: Trailer Hitch For A 2022 Mercedes-Benz GLC 300
- Q&A: Why Is it Better to Have Trailer Wiring that Stores Inside 2015 Mercedes GL550
- Shop: Mounting Bracket 4-Pole Flat
- Shop: Curt 4-Way Flat Trailer Connector with Circuit Protected Powered Tail Light Converter
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: How to Determine Tow Capacity for a 2008 Toyota Tundra Short Bed
- Shop: Brake Controller
- Shop: RV Covers
- Q&A: Recommended Weight Distribution Hitch For Trailer W/ 440lbs TW, and Trailer W/550lbs TW
- Q&A: How Do I Know How High The Ball Should Sit Above the Ground
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Mud Flaps
- Shop: Vehicle Seat Covers
- Shop: Towing Mirrors
- Article: My Trailer Hitch Doesn't Fit
- Video: Cipa Custom Towing Mirrors Installation - 2014 Ford F150
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 44649