Trailer Wiring Recommendation for a 2014 Mercedes GLK

Question

Question:

can this product be used on a 2014 Mercedes GLK?

asked by: Mike

0

Expert Reply:

The Curt trailer wiring part # C56496 is the confirmed trailer wiring recommendation for a 2014 Mercedes GLK like so it would be a great option if you are looking for trailer wiring.

This is a universal type kit that will require hardwiring to the taillight wires of your vehicle though.

expert reply by: Jameson C

0

Answer 1

Curt 2-inch hitch #C13190 is a confirmed fit on your 2015 Mercedes-Benz GL550 so long as it does not have the Active Curve System. This hitch is rated for tongue weight (TW) of up to 900-lbs and for trailer weights up to 7500-lbs. According to my…

view full answer...

Answer 2

Having the 4-way run out of the back hatch is actually the preferred method although it seems like it wouldn't be. Having the 4-way stored inside the cab of the keeps it protected from rain and moisture to prevent corrosion and keeps it protected…

view full answer...

Answer 3

Though The Curt Trailer Hitch Receiver #C13315 is not confirmed to fit your 2022 Mercedes-Benz GLC we do have a few trailer hitches that would work for you. If you have the SUV-GLC300 you will need The Curt Trailer Hitch Receiver #C84ER. This trailer…

view full answer...

Answer 4

In order to install the Curt #C13190 some trimming will be required in addition to the bolt-on installation. A section of the heat shield will need to be trimmed that is approximately 11" x 6" and also the outboard tabs on each side of the…

view full answer...

Answer 5

The Curt trailer hitch, part #C13290 is confirmed to fit. I attached an installation video for this hitch for you. If you'll be using the hitch for towing, you'll also need a trailer wiring harness, part #C59496 and a ball mount/trailer ball…

view full answer...

Answer 6

First, for a trailer hitch that fits your 2014 Mercedes GLK 250 BlueTec there is one option; Curt trailer hitch #C13155. And for a trailer wiring harness I recommend #C59236 since it is designed to work with 2 or 3 wire electrical systems and PWM…

view full answer...

Answer 7

We haven't had the chance to install the Curt Wiring Harness part #C59236 on a 2013 Mercedes GLK 250 so I do not know the correct color wires you would need to use. However, I attached a video that shows exactly what you will need to do to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...