Upgraded Equalizer Suspension Kit for Trailer With EQ-E34 Curved Equalizer  

First thing you want to do is verify that you are using the correct dimensions for your hanger spacing on your trailer. The distance between the center hanger and either of the outside hangers should be right at 29-1/2 inches. There should be at…

You could do that, but in order to get the height increase, you'll also need to go with taller front and rear spring hangers. For instance, if your current equalizers are 2 inches high, and you switch to the #TREQ310 equalizer which would add two…

The best thing to do in this situation, because you have such little clearance, even with an empty trailer, is to replace your equalizers with taller ones. To pick out a compatible replacement equalizer you'll need to measure the distance between…

Okay let's get started here with the suspension for your 2012 Skyline Koala 27CDS with 3,500 lb Axles; for the first part regarding your equalizers and suspension upgrade kit, so long as your current equalizer is spaced 6 inches (or close to it -…

You actually should shoot for 4-1/2" of clearance between the top of your tire and the bottom of the fender well. This accounts for flex in your suspension. Unless 2,280 lbs is the GVWR (gross vehicle weight rating) of your trailer then you need…

Those are some good options, and the best overall upgrade (without getting too crazy like you said!) for your Jayco with tandem 3,500 lb axles is going to be the MORryde CRE3000 with the X-factor crossmember. The Road Armor is good, but the…

We have suspension systems similar to the Moryde that I can give you dimensions for. These systems aren't designed to give you and increased height although they may add a couple inches depending on the height of the equalizers you are replacing.…

For your 3-inch axles the normal spacing of the hangers included in the DexterTandem-Axle Trailer Hanger Kit is 29-1/2-inches. You can probably space them the 3/4-inches further apart, to a spacing of 30-1/4-inches, without too much impact on the…

Equalizers for trailer suspension have different shapes, lengths, and heights to accommodate different axle spacing, spring lengths, and deck heights. Going to an equalizer that is not the same length and height as the original will require replacing…

The particular load range of trailer tire needed for any given application depends on the number of axles and tires. If a trailer were to have, for example, two 3500-lb-rated axles, then it would likely have a gross weight rating (GVWR) of about…

Different trailer configurations require different equalizers. It all depends on the springs, axle spacing, hanger spacing, height needed and so on. In many cases if you want to change the equalizer to something with different measurements you would…

For your double eye springs that are 25-1/2 inches, it is likely your hangers are 29-1/2 inches apart on center and your springs most likely were originally 25-1/4 inches as they will stretch slightly over time. For instance if you were to use 25-1/4…