Review of RV Ride Control Trailer Leaf Spring Suspension - Alignment and Lift Kits - LC87120 Video

Bronze bushings like the #D014-077-00 do not require reaming when installing a shackle bolt into them. The splines in the bolt might make it a little tight but that is on purpose and does not require enlarging.

Thanks for reaching out about the Correct Track Trailer Alignment and Lift Kit #RR23QX, Mike! The instructions only mention adjusting the front axle before the rear axle, but I agree with you - the middle hanger that holds the equalizer will need to…

I have an option for you, but unfortunately we do not sell a kit with just the wet bolts and bushings for the Lippert Road Armor on your 2019 Keystone Montana High Country 375FL. I recommend the Bronze Bushing #D014-077-00 which is 9/16" I.D.…

A 2-3/8 inch diameter Dexter axle is going to have a 3,500 lb capacity. Having the leaf springs over the axles (or vice versa) would not affect the weight capacity of the axle in any way either.

I have a replacement option for you, but the only slipper spring we offer that is 1-3/4" wide and is 26-1/4" long is the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long #e33SR. Since you mentioned that…

You can add a lift kit to raise your trailer since you already have your axles underneath your leaf springs. So you can get another 2 inches of lift with the following: - Correct Track Trailer Alignment and Lift Kit - Single Axle #LC87120

I definitely see what you're saying about the spacer, found as part #LC34UD, from the 2nd gen Correct Track LC407131. With that being said, the Correct Track Trailer Alignment and Lift Kit #RR23QX has been safety tested and works just fine…

I contacted Lippert and the Road Armor Shock Absorbing Equalizer Kit part #LC696740 is compatible with the Lippert Components Correct Track Trailer Alignment and 2" Lift Kit part #LC87120. If you use the road armor equalizers you will not need…

The bronze bushings and wet bolts are a great option but they still do require maintenance especially under the conditions you referenced. There really isn't any new information in comparing it is basically the difference between maintenance…

The Correct Track Trailer Alignment and Lift Kit part #LC87120 when compared to the Lippert Components Standard Axle Lift Kit part #LC425750 offers more lift, adjustable lift, and axle alignment correction so that is what I recommend.

Installing a 4,000 lb capacity leaf spring on a trailer with a 3,500 lb capacity axle will make the suspension stiffer which could then in turn minimize the risk of the axle contacting the frame. However, this is not what I recommend to fix your…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…