Does the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector Require Programming

Question

Question:

Good Morning, Do I have to program the 7 plug wire harness in my system following the in installation of the 56413 wiring harness in my 2019 Ford F 150 XLT as was described in a video that I just watched or should it be already to go?

asked by: Michael G

1

Helpful Expert Reply:

When installing the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56413 on your 2019 Ford F-150 XLT it should be ready to go after installation. Typically having to program anything involves the brake controller and that typically happens when you are installing an aftermarket brake controller in a truck that has an OEM brake controller. When this happens you will often times need to have your truck flashed by the dealership to be able to use the aftermarket brake controller.

But installation of the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56413 should not require you to have anything programmed. I have included a video that gives a review and shows the installation of the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56413 for you to check out.

expert reply by: Scott S

1

Answer 1

According to the owners manual for a 2014 Ford F-150, Fuse 17 is a 30 amp fuse for the brake controller. If there is no fuse in that location then the brake controller isn't going to work. I recommend adding a 30 am fuse and testing the…

view full answer...

Answer 2

To install a 7-way on a 2018 Ford F-150, you'd use the Curt #C56413 which installs as shown in the linked video.

view full answer...

Answer 3

Your 2018 Ford F-150 without the tow package and 7-way does have brake controller wiring currently so once you have the 7-way part #C56413 installed you'd be able to easily install a brake controller using the truck's factory wiring.…

view full answer...

Answer 4

You can install a 7 way connector on your 2019 Ford F-150 by using the Curt T-Connector #C56413, which will plug into the factory supplied 4 way connector plug on your vehicle and give you a fully functioning 7 way connector. If you've got a…

view full answer...

Answer 5

All the 2020 Ford F-150 trucks have the ability to upgrade to a 7 Way. The picture you supplied does look to be the port the Curt #C56413 will connect to. I included an install video we did on a 2019 F-150, but the install will be the same on your…

view full answer...

Answer 6

Yes, the install harness part #22292 is the quick install portion of the brake controller part numbers you mentioned along with the Primus IQ part #TK90160. This is the correct kit for your 2010 Ford F-150 with a factory 7-way. I attached an install…

view full answer...

Answer 7

I attached a picture of the panel that would need to get removed on your 2009 Ford F-150 to access the brake controller harness. The correct harness to use with the controller #TK90160 that you referenced is the #22292 for your truck.

view full answer...

Answer 8

For your 2017 Ford F-150 we have the 7-way kit part #C56413 as a confirmed fit. This plugs into the trailer wiring connector that is present at the truck frame rail and gives you a functional 7-way. I attached an install video for this for you to…

view full answer...

Answer 9

Since you don't have the pins in the fuse position 24 that means you will need to use the Kit #5506 to install the Prodigy P3 #90195 with the Adapter #22292 on your 2018 Ford F-150. For some reason Ford doesn't always have that 24 location…

view full answer...

Answer 10

Yes. You can install the Curt T-Connector #C56413 on your 2019 Ford F-150 and it will be compatible with your factory brake controller. This will install a fully functioning 7 way connector on your truck to allow you to tow a trailer with brakes.…

view full answer...

Answer 11

The correct 7-way kit for your 2018 Ford F-150 that matches the rectangular connectors you sent us a picture of is the Curt part #C56413. I attached a picture our installers took that shows this connecting to same connectors.

view full answer...

Answer 12

Where exactly are you attempting to plug the harness in? Unlike many trailer connectors, the #C56413 doesn't use a round connector. The connector you're looking for is located on the cross-member directly behind the 7-way, it could be…

view full answer...

Does the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector Require Programming

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching