Brake Controller Install Harness Recommendation for 2010 Ford F-150

Question

Question:

Hello. I was looking at the item at this page: TK90160 22292 Does this item include the Quick Connect cable? In the description it says that it is optional, but on the product title, it is showing both part numbers. Thanks,

asked by: Mike D

0

Expert Reply:

Yes, the install harness part # 22292 is the quick install portion of the brake controller part numbers you mentioned along with the Primus IQ part # TK90160. This is the correct kit for your 2010 Ford F-150 with a factory 7-way. I attached an install video for a similar F-150 for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The correct 7-way kit for your 2018 Ford F-150 that matches the rectangular connectors you sent us a picture of is the Curt part #C56413. I attached a picture our installers took that shows this connecting to same connectors.

view full answer...

Answer 2

Yes. You can install the Curt T-Connector #C56413 on your 2019 Ford F-150 and it will be compatible with your factory brake controller. This will install a fully functioning 7 way connector on your truck to allow you to tow a trailer with brakes.…

view full answer...

Answer 3

They will, but you'll need to install a brake controller to actuate the trailer brakes. I'd recommend a reasonably priced proportional controller like the Brake EVN #TK63VR. For safe, predictable trailer braking a proportional…

view full answer...

Answer 4

Where exactly are you attempting to plug the harness in? Unlike many trailer connectors, the #C56413 doesn't use a round connector. The connector you're looking for is located on the cross-member directly behind the 7-way, it could…

view full answer...

Answer 5

Though your 2018 Ford F-150 does have a plug under the dash, not all the wires are connected and you will need extra wiring to get it working, This can be quite the pain to do, so it is actually easier to just run all new wire for the 7 Way. If you…

view full answer...

Answer 6

When installing the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C56413 on your 2019 Ford F-150 XLT it should be ready to go after installation. Typically having to program anything involves the brake controller and that…

view full answer...

Answer 7

All the 2020 Ford F-150 trucks have the ability to upgrade to a 7 Way. The picture you supplied does look to be the port the Curt #C56413 will connect to. I included an install video we did on a 2019 F-150, but the install will be the same on your…

view full answer...

Answer 8

According to the owners manual for a 2014 Ford F-150, Fuse 17 is a 30 amp fuse for the brake controller. If there is no fuse in that location then the brake controller isn't going to work. I recommend adding a 30 am fuse and testing the…

view full answer...

Answer 9

For your 2017 Ford F-150 we have the 7-way kit part #C56413 as a confirmed fit. This plugs into the trailer wiring connector that is present at the truck frame rail and gives you a functional 7-way. I attached an install video for this for you to…

view full answer...

Answer 10

Since you do not have the towing package, you will not have the second part of the trailer wiring kit, but there is a lead on your body harness that will be plug and play with this wiring harness #C56413. It is very simple and I've included…

view full answer...

Answer 11

Your 2018 Ford F-150 without the tow package and 7-way does have brake controller wiring currently so once you have the 7-way part #C56413 installed you'd be able to easily install a brake controller using the truck's factory wiring.…

view full answer...

Answer 12

Since you don't have the pins in the fuse position 24 that means you will need to use the Kit #5506 to install the Prodigy P3 #90195 with the Adapter #22292 on your 2018 Ford F-150. For some reason Ford doesn't always have that 24…

view full answer...