7-Way and Brake Controller Solution for 2018 Ford F-150 without Tow Package

Question:

My question is if i was to purchase this part and use it on my 2018 ford f-150 w/out two package would this work with a brake controller as well if not then what route do i need to go? i do have the factory 4 way plug

asked by: Colton M

Expert Reply:

Your 2018 Ford F-150 without the tow package and 7-way does have brake controller wiring currently so once you have the 7-way part # C56413 installed you'd be able to easily install a brake controller using the truck's factory wiring.

The P3 part # 90195 and the install harness part # 22292 would be a really great and easy to install option. This is the most advanced and easiest to use brake controller on the market so I recommend it highly.

expert reply by: Jameson C

Matt S.

5/27/2020

My truck has only a 4 pin plug. I am interested in adding a 7 pin plug and a trailer brake controller. If I used part # C56413 to get a 7 pin, would that work with a Ford OEM brake controller?

Chris R.

5/29/2020

The Curt Wiring Harness # C56413 will provide you with a fully functional 7-Way (which allows you to use a traditional brake controller). I'm not sure your truck would be equipped with an OEM controller though if it only had a factory 4-Way at the bumper. This component still likely needs to be added. You can check with a local Ford dealer to see if they can install the OEM part, or you can simply go with an aftermarket unit like the above-mentioned Prodigy P3 # 90195. The Plug-In Harness # 22292 can be used for a simple plug-and-play install.