Expert Answers about Custom Fit Vehicle Wiring
- What Size Fuse Does The Draw-Tite Custom Fit Vehicle Wiring # 118258 Use For 2008 Hyundai Santa Fe
- I walked out to the warehouse and pulled the Draw-Tite Custom Fit Vehicle Wiring # 118258. This wiring kit uses a 10 amp fuse in the yellow fuse holder.
I have linked instructions for the Draw-Tite Custom Fit Vehicle Wiring # 118258.
view full answer... - Need Trailer Wiring to Use on 2008 Toyota Corolla and Fold-Up Trailer Kit
- We have a custom fit vehicle wiring for your vehicle. I used the Fit Guide on the website and found that the wiring kit you need for your 2008 Toyota Corolla is the Curt Custom Fit Vehicle Wiring, part # 55542. This kit will wire into the vehicle wiring and allow you to connect your trailer to your 2009 Toyota Corolla.
Yes, this custom fit wiring simply plugs into your factory wiring harness, it is a plug and play kit.
When connecting the trailer wiring to your vehicle it is always a...
view full answer... - Tow Ready Custom Fit Vehicle Wiring Harness for 2014 Kia Sorento
- The part number for the Curt Custom Fit Vehicle Wiring for a 2014 Kia Sorento is # C56332.
Please see the product page for current prices on part # C56332.
I have included a video of the installation of Trailer Wiring Harness # C56332 for a 2014 Kia Sorento.
view full answer... - How To Install Tow Ready Custom Fit Vehicle Wiring # 118505 On 2009 Toyota Prius
- The item you selected, Tow Ready Custom Fit Vehicle Wiring, part # 118505, plugs in-line with the vehicles tail light connectors. You will need to access the wiring behind the tail light by removing the plastic trim pieces inside the vehicle. The connector with the Yellow wire will connect to the drivers side tail light harness.
Then, you will need to connect the White wire which is the ground to a clean metal surface. You can use an existing bolt to connect the ground wire.
Then, you...
view full answer... - Trailer Wiring Harness for a 2006 Mitsubishi Outlander LS
- Yes, the Curt T-Connector trailer wiring harness # C55565 will fit your 2006 Mitsubishi Outlander LS. I have included a link to the installation instructions for you as well.
view full answer... - Will the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Fit a 2018 Ford F-150 Raptor
- Yes, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56009 is a fit for a 2018 Ford F-150 Raptor.
view full answer... - Ground or No Ground for Installing a 4-Way Trailer Wiring Harness on a 2004 Toyota Rav4
- You are correct the Tow Ready Custom Fit Vehicle Wiring, item # 118389, has a ground wire that is attached to a ground location behind the vehicle tail light and the Hopkins Custom Fit Vehicle Wiring, item # 33465, does not have an extra ground wire. Both harnesses will work properly on your vehicle.
I would select the Tow Ready Custom Fit Vehicle Wiring, item # 118389, because of the extra ground protection it offers. If there is a short circuit situation on the trailer the Tow Ready...
view full answer... - Will the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Fit a 2018 Ford F-150 Raptor
- Yes, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56009 is a fit for a 2018 Ford F-150 Raptor.
view full answer... - Is the Tow Ready Custom Fit Vehicle Wiring # 118323 Compatible with a 2007 Dodge Dakota
- The Tow Ready Custom Fit Vehicle Wiring, item # 118323, for your 2007 Dodge Dakota will not cause any problems with the vehicle circuitry or cause any fault codes to display on the vehicle computer system as long as the connectors are installed properly.
Many of our customers have the same concern. All of the wiring harnesses we sell are tested by the manufacturer to work with the vehicles wiring and if we notice a problem with a harness we let them know immediately. We sell several of...
view full answer... - Trailer Wiring Harness For 2020 Toyota Highlander
- I do have an option for you but the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # 56042 only fits a 2008-2019 Toyota Highlander.
There is not a custom fit wiring harness yet for the 2020 Toyota Highlander. I recommend to use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part # 119250KIT which is not a custom fit option but is designed to clamp onto the factory wiring instead of cutting the wiring to install...
view full answer... - How a Tow Ready Custom Fit Vehicle Wiring, part # 118498, Connects to 2011 Toyota Sienna
- When installing this Tow Ready Custom Fit Vehicle Wiring for the Toyota Sienna, 2011 part # 118498 on 2011 Toyota Sienna you are actually using your vehicles current tail light circuitry that is located at the rear of your vehicle.
It sounds like your salesman was trying to explain to you that your Toyota Sienna will not be wired from the factory for trailer wiring, but if you install this custom wiring kit for your Sienna you will be good to go.
Make sure you use the included inline...
view full answer... - No Power To Trailer Connector With Tow Ready Custom Fit Vehicle Wiring # 118478 on 2007 Lexus RX350
- The correct trailer wiring harness for your 2007 Lexus RX-350 is the Tow Ready Custom Fit Vehicle Wiring, part # 118478. I would begin by making sure there is power going into the converter box by using a circuit tester, like part # PTW2993. Then, make sure power is coming out of the converter, if power is not coming out of the converter, it is possible that the unit is bad and would need to be replaced.
I would also inspect the wiring going to the battery and make sure that you have a...
view full answer... - Trailer Wiring Recommendation for a 2010 Chevrolet Equinox, Circuit Protected vs Unprotected
- We stock both the Tow Ready Custom Fit Vehicle Wiring, # 118494, and the Curt Custom Fit Vehicle Wiring, # 56094, because we have customers that request both styles. Many times customers do not want to run the extra wire to the vehicle battery, so they order the # 56094 harness. The Battery connection is the biggest advantage of the # 118494 harness for protecting the vehicle circuitry.
I would use the circuit protected model, # 118494, because there is always a possibility of a short...
view full answer... - Trailer Wiring Harness Needed for a 1997 Ford Explorer with Factory Tow Wiring Harness
- If you Ford Explorer has the factory tow package installed, then the Tow Ready Custom Fit Vehicle Wiring for the Ford Explorer, 1997, item # 118241, will work on your vehicle. We carry this item for you to purchase.
To determine if the factory tow package is active on your vehicle you should use a circuit tester and test the connection you have found to make sure that the left turn/stop, right turn/stop and tail light functions are working. If any of these functions are not active you...
view full answer... - Will the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Fit my 2015 Jeep Wrangler Rubicon
- Yes the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56200 is a custom fit item designed to fit your 2015 Jeep Wrangler Rubicon.
Check out the installation video I linked for you.
view full answer... - Will the Tow Ready Custom Fit Vehicle Wiring Work on a 2007 Honda Accord with LED Lights
- This Tow Ready Custom Fit Vehicle Wiring # 118302 will work on your 2007 Honda Accord with LED taillights. You will not need a more expensive wiring kit for your vehicle. I attached installation instructions and an installation video for this product for you to check out also.
view full answer... - Is There a Trailer Wiring Harness Compatible with the 2018 VW Tiguan 4Motion?
- There is not a custom fit at this time for your 2018 VW Tiguan with 4Motion. The custom fit harnesses from our manufacturers exclude the 4Motion. Because there is not a custom fit, your best option is to use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This kit will not splice into your wires but instead will use the zero contact interface sensors to capture the needed signals. The module will draw power directly...
view full answer... - Correct Wiring Configuration for the Curt T-Connector Vehicle Wiring Harness on a 2012 Ford Explorer
- When installing the Curt T-Connector Vehicle Wiring Harness # C56306 (which is custom fit for your Explorer), you will want to follow the written instructions that came with the harness and ignore the connector. The connector is not necessarily a custom fit item like the harness and instruction are.
view full answer... - Trailer Wiring Harness that Fits 2020 Lincoln Corsair
- For your 2020 Lincoln Corsair we have the Tekonsha trailer wiring harness # 119250KIT that you referenced as a confirmed fit which is a really great option as it's easy to install and very reliable but the other option you mentioned does not fit and is not the way to go.
view full answer... - Recommended Custom Fit Wiring Harness for a 2021 Volvo XC40
- To add a custom fit wiring harness to your 2021 Volvo XC40 you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118792. This custom-fit T-One connector plugs into your Volvo's wiring harness, which is located in your rear cargo area, behind the tail lights.
view full answer...
Go To Results