Draw-Tite Front Mount Trailer Hitch Installation - 2018 Ford F-150 Video

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

The good news is that neither the Curt #C31083 or the Draw-Tite #65067 front mount trailer hitches will reduce the ground clearance on your 2018 Ford F-150. If you want a receiver that sits above the lowest piece of fascia then the Curt requires that…

For your 2024 GMC Sierra 3500 we only have the Curt front hitch part #C52NR as a confirmed fit. When this hitch is installed it hangs below the front bumper like what you can see in the attached picture.

For your 2017 Ford F-150 you can use the Curt Front Mount Trailer Hitch Receiver #C31083 for a front mount hitch. This hitch has a 2" receiver opening, a 500 lb vertical load rating, and a max capacity of 5,000 lbs. This hitch will also come…

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 will actually work with the auto deploying air dam on your 2022 Ford F-150, although there is some trimming of the air dam and the reinforcement bracket to get it installed (see attached photo…

The Draw-Tite Front Mount hitch part #65067 installs so that it sticks out from the plastic air dam of the Ford. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. I have attached a photo for your…

For your 2018 Ford F-150 I recommend the Curt Front Hitch #C31083 because it's make in the USA, is easy to install, and has plenty of capacity at 9,000 lb line pull. In case you were looking for a plow too I attached a link to this page that has…

I can tell you that the Curt #C31089 will sit fairly flush or even slightly behind the farthest edge of the front end of your 2019 Ram 2500, so it's not exactly ideal for a bike rack. A better solution might be the Draw-Tite Front Mount Trailer…

The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit #BW77FR is compatible with your 2022 Ford F-150 with the 3.5 EcoBoost/Electric Drive setup. According to my research the battery is behind your cab but not quite…

You actually don't really lose any ground clearance when you have the front hitch part #65067 installed on your 2016 Ford F-150. The lower air dam on the front of the truck gets trimmed out to allow the hitch to fit at basically the same height…

If you're looking for a new coupler to replace a Tie Down Engineering Model 20, I recommend the Demco Hydraulic Brake Actuator part #DM8204311 which like the Model 20 has a 20,000 lb weight capacity designed for a 2-5/16" hitch ball. It uses…

The Draw Tite part #65067 will sit lower to the ground than the Curt hitch part #C31083 which is also a fit for your 2016 Ford F-150. The Draw Tite requires you to notch a couple inches out of the bottom of the air dam up front, but the Curt requires…