Which Torflex Lift Kit Fits Dexter 3,000 Torflex Axle

Question

Question:

Received this lift kit k71-707-01 a couple months ago. Recommended by etrailer. Im ready to install but I read on your sight that the k71-723-01 is the correct lift kit for this model/axel...which one is correct? Thanks for your help-

asked by: Bill/Ben L

1

Helpful Expert Reply:

Since you have a Dexter Torflex 3,000 lb trailer axle the correct lift kit is the part # K71-707-01 that you have. The other part number you mentioned is for lighter capacity axles.

expert reply by: Jameson C

1

Answer 1

The Torflex Lift Kit item #K71-707-01 is the correct kit for a #10 Dexter torsion axle and you won't need to drill any new holes into the spacers. I have attached a couple of pictures below so you can see how they look once installed. I have…

view full answer...

Answer 2

The Torflex lift kit part #K71-723-01 is the only size lift we have that fits this axle configuration. There isn't a 2-5/8 inch lift available that is similar to it.

view full answer...

Answer 3

We can help you out here, and first, thanks so much for the photo it was super helpful. And based on that I can tell you that your tandem axle trailer with #10 Torflex axles is absolutely compatible with the Dexter lift kit: - Torflex Lift Kit -…

view full answer...

Answer 4

The Dexter Torflex Lift Kit #K71-707-02 referenced in your question is designed for the #10 Torflex axle with a 2,300 to 4,000 pound capacity. As you mentioned, the lift kit cannot be used with Torflex axles that use a 3 inch high profile bracket.…

view full answer...

Answer 5

Thanks for the photos! Based on that you do not have 3 inch high-profile brackets on your #10 Dexter Torflex axles, so yes, you can absolutely use the Dexter lift kit on your 2019 Taxa Mantis: - Torflex Lift Kit - Single Axle - 2-5/8" Lift…

view full answer...

Answer 6

For single Torflex axle trailers like what your Lance has we have 2 different lift kits, part #K71-723-01 for #9 Torflex axles and part #K71-707-01 for #10 Torflex axles. From what I could find on your 2015 Lance 1575 it looks like you have a #10…

view full answer...

Answer 7

We offer two Torflex axle lift kits for Dexter's torsion axles. All you need to check is the axle weight rating, which will appear either on the axle's own identification sticker or on the trailer's main information plate…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

Answer 11

Based on the specifications that Dexter gave me for your axle, your axle is a 3,500 lbs torsion axle. We do not carry torsion axles, so the best upgrade for your trailer would be an axle-less suspension system. The axle-less system will be far easier…

view full answer...

Which Torflex Lift Kit Fits Dexter 3,000 Torflex Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching