Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
(104 reviews)
Price: $168.74
In Stock
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
Item # C59496
Our Price: $168.74
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (104)
- Q & A (0)
- Photos
CURT Custom Fit Vehicle Wiring - C59496
- Universal Fit
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
- 8 Feet Long
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Avoids overloading your vehicle's electrical system by connecting directly to your battery
- Power wire and fuse kit included
- Designed with safety in mind
- Guards against electrical shorts, mis-wire situations, and electrostatic discharge
- Splices into your vehicle's wiring with the included quick-splice connectors
- Color-coded wires ease installation
- Resists damage from shock and vibration for superior operation on rough roads
- Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction
- Includes durable, molded-rubber, female output socket with protective dust cover
Specs:
- Application:
- Vehicles with 2-wire or 3-wire electrical systems
- Trailers and vehicles with LED or incandescent lights
- 4-Way harness length: 58"
- Splice-in wire length: 17"
- Ground wire length: 17"
- Power wire length: 20'
- Maximum amperage:
- Turn lights and brake lights: 3 amps per circuit
- Tail lights: 3 amps per circuit
- Wire gauge:
- Power wire: 12
- Limited 1-year warranty
Do I Need A Tail Light Converter?
Some vehicles operate on a 3-wire system, wherein the brake signal and the turn signals run on separate wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) But most trailers run on a 2-wire system, which means the brake and turn signals travel along a single wire. You'll notice that, on your trailer, the brake light will flash for the turn signals.
If your vehicle operates on a 3-wire system, it will need to be converted so it will be compatible with the wiring system of your trailer. This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
Powered by Your Battery
This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailer lights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter.
Converter Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn |
| Brown | Tail lights |
| Black | Battery power |
| Red | Brake |
| White | Ground |
| Yellow | Left turn |
Powered Tail Light Converter Installation
This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's. The powered converter box has splice-in wires on one end and a harness with a 4-way flat vehicle-end connector on the other. It also comes with a power wire that will connect to your battery so your electrical system doesn't get overloaded.
To begin the installation, use the included circuit tester to double-check the function of each wire on your vehicle's tail light wiring harness. The color/function of the splice-in wires on this converter may not match the color/function of those on your vehicle, so you'll want to be sure to check all of the wire functions first. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in one of the taps and snap the cover down.
Using the included double-sided tape, stick the converter box to a flat surface inside your vehicle near the tail lights. It's helpful to clean the surface first so the tape can adhere fully.
Once the converter box is spliced in, you need to run the power wire up to your battery. Be sure to remove the fuse before connecting anything so you don't blow it! You can put it back in once everything has been installed. To hook up to your battery, you'll need to disconnect the negative cable from your battery and attach the power wire to the positive terminal with the included ring terminal.
Find a raw, unpainted metal surface to use as a grounding point and secure the white ground wire using the included self-tapping screw. Cleaning the surface before securing the white wire will ensure the converter is fully grounded. If you have a 2-wire system, the red brake wire will need to be grounded as well. You can do that in the same way, using an extra ring terminal (sold separately). Finally, secure the converter wires to your vehicle using included cable ties.
Quick Tips:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
Built Using Surface-Mount Technology
Curt builds each tail light converter using surface-mount technology (SMT). This construction method involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a smaller circuit board that provides more routing area and that offers superior performance, reliability, and durability.
Circuit boards constructed using SMT perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, increasing durability and lifespan. In addition, lower resistance levels ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
56496 Curt Vehicle Wiring Harness with Vehicle End 4-Pole Connector and Powered Converter Kit - 58" Long
55151 Powered Converter Wiring Kit
48705 Circuit Tester
Replaces 56146KIT
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2009 BMW 1 Series
- 2008 - 2009 BMW 1 Series 128i
- 2008 - 2009 BMW 1 Series 135i
- 2010 - 2018 Ram 1500 without factory hitch
- 2019 - 2024 Ram 1500 Classic without factory hitch
- 2016 - 2024 Ram 2500 6-1/2 Foot Bed with factory hitch
- 2016 - 2024 Ram 2500 6-1/2 Foot Bed without factory hitch
- 2016 - 2018 Ram 2500 8 Foot Bed with factory hitch
- 2016 - 2024 Ram 2500 8 Foot Bed without factory hitch
- 2010 - 2015 Ram 2500 with factory hitch
- 2010 - 2015 Ram 2500 without factory hitch
- 1994 - 1998 BMW 3 Series
- 1984 - 2010 BMW 3 Series
- 2007 - 2010 BMW 3 Series 328xi Sedan
- 2007 - 2009 BMW 3 Series 335i Sedan
- 2007 - 2010 BMW 3 Series 335xi Sedan
- 1999 - 1999 BMW 3 Series Convertible
- 1999 - 1999 BMW 3 Series Coupe
- 1992 - 1993 BMW 3 Series Coupe and Sedan
- 2000 - 2005 BMW 3 Series Coupe, Sedan, and Wagon - excluding M3
- 1999 - 1999 BMW 3 Series Sedan
- 1986 - 1989 Mazda 323
- 2016 - 2024 Ram 3500 6-1/2 Foot Bed with factory hitch
- 2016 - 2024 Ram 3500 6-1/2 Foot Bed without factory hitch
- 2016 - 2018 Ram 3500 8 Foot Bed with factory hitch
- 2016 - 2024 Ram 3500 8 Foot Bed without factory hitch
- 2010 - 2015 Ram 3500 Pickup with factory hitch
- 2010 - 2015 Ram 3500 Pickup without factory hitch
- 2003 - 2009 Toyota 4Runner
- 2003 - 2022 Toyota 4Runner without factory trailer connector See All Vehicle Fits
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit - C59496
Average Customer Rating: 4.7 out of 5 stars (104 Customer Reviews)
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.by: Patricia 02/20/2024
Complete converter. Perfect for my car. Made towing a trailer very safe and easy.
by: Chris 01/18/2024
2023 Ford Maverick
Also a must for newer vehicles with fine gauge wiring to assure adequate current is sent to the trailer lights. Easy to install and works great!!
by: Matthew05/06/2022
2005 Volvo XC70
I installed this in about 1 hour mostly reading and discovering which wires to use. I went and tested on a standard trailer and all the lights work as expected. With the battery in the back of the Volvo xc70 2005 I didn't have to run the wire to the front so it was even easier to install than most vehicles
by: Daryl 11/14/2023
The hitch was easy to install. But the wiring harness I couldn’t install it. I didn’t want to split the wires.
by: Alan11/07/2020
2004 Mercedes-Benz SLK-Class
Very happy with the trailer hitch and 4-way tail light converter for my 2004 Mercedes SLK 320. I never thought anyone would make one for a sports car, but etrailer does and it works perfectly. I found the etrailer hitch on the "SLK World" website, where other SLK owners have also installed it, and would recommend going there if you have an SLK.
by: Donald 02/02/2024
Haven't installed the harness yet
by: Ben05/30/2022
Easy plug and play install. Replaced old version that had a fried converter.
Second time buying from Etrailer, will buy again if necessary. Came in a timely manner.
Ben
5/30/2023
Still in good shape no issues
by: Al03/30/2023
I have an older but well maintained Class A RV. I wanted to tow with lights but found out my turn signals were not the same as my brake lights. etrailer had the solution for my problem. Been on 2 cross country trips with the lights module and everything works great !
by: Wordash Jones06/15/2023
Product was great! Fit perfectly on my 2022 Kia Sorento Hybrid S Model. I worked at a dealership so I got the hook-up for installation but the product and the service are unmatched at etrailer.
by: Kelsey 05/14/2023
"Plug and play" towed multiple trailers with no lighting issues very happy with the product.
by: William 11/20/2023
2022 Genesis GV80
This harness worked great and very easy install.
by: George Jetson04/30/2023
2021 Ford Bronco Sport
Mounted the receiver yesterday. Receiver is very well built. Instructions could have been better. Instructions are clear on where to trim the bumper cover but do not mention modifying the heat shield that is behind it.
Overall a good fit and a well made product.
by: Dave K02/14/2023
Not looking forward to the wiring installation, but the instructions look very good. Curt makes a really great hitch.
by: Bryan 10/08/2022
2016 Volkswagen Jetta
Got this for a 2016 Jetta. Instructions say to run this outside and under the car, but found it easier to run up the left side in the interior, tucking under the trim pieces and through the steering boot to the fuse box. Works great!
by: Steve 07/07/2022
Looks to be of high quality
Steve
7/12/2023
100
by: Tim P.10/16/2018
2004 Dodge Sprinter
converter and flat 4 wiring was fine. for my application, the green RH turn signal wire was over 2 feet too short to cross from one tail light to the other. really, add 3 ft to the wire, much less hassle. the power wire from battery to converter is ALSO TOO SHORT, by more than 5 feet. Since that part of the kit is really only the fuse holder and the wire, this was a waste of money. NOT AT ALL WHAT I WOULD CALL A UNIVERSAL FIT.
Heather A.
10/27/2018
This wiring harness part C59496 is considered a universal fit because it is not a plug and play custom fit application. It can be hardwired into many different vehicles. If you needed extra wire for your vehicle, I recommend part # DW02412-1 for extra 14 gauge wire.
Helpful Links
by: Tony10/12/2023
Great customer service
by: Erin 05/20/2023
works great!
plug and play!
by: KPT07/10/2022
Works well - installation isn't hard after you figure out where to mount the unit and identify which wires in the vehicle harness are needed to attach the converter.
The tester probe is pretty much useless as it's hard to see. I ended using my own test tools (multimeter) to confirm its operation.
Rather than drill holes in the vehicle. I keep the harness inside the vehicle and pull it out when needed.
by: Juan04/20/2021
The Curt trailer hitch has been perfect- i also purchased the light system to connect to the trailer - it took me a whole day to install and i am thankful for the detailed videos for the hitch and lights. I only got help with the hitch when lifting it into position as i do not have a hitch jack. I think the hitch is top quality and I am confident to pull anything-
by: Steven04/27/2022
2008 Lincoln Town Car
The trailer lighter converter doesn't seem to work the brake lights after installation. I will be contacting customer service about this issue.
Sierra K.
5/4/2022
Before you test the harness with a circuit tester like item # PTW2992 can you please remove the fuse on the power wire for 30 minutes, then reinstall it. This fuse should be located close to the vehicle battery in a fuse box. If the powered converter box has engaged its circuit protection feature, this will reset the box unless it was overloaded and it was damaged.
Helpful Links
Steven
5/4/2022
I wish to apologize thinking there was an issue with the converter when there wasnt, the next day I did a check and because I infact thought I needed to connect the brake red wire directly to the brake switch and not the multi-purpose red and green wire on my 08 Lincoln. It works great when you wire it correctly.
by: Ej02/12/2019
2017 Mercury Tracer
Contains all you need to make this work. Used it on my 2017 GLE350 that has LED tail lights using combined brake and signal lights. Figuring out the correct wires to connect to was a bit trial and error. Running the wire from the module to the fuse box below the rear passenger seat took some time as well. But the setup works without a problem.
Wires:
Brake (red): connect to ground.
Lights (brown): right tail light, white with blue tracer.
Right turn: right tail light, gray/black wire
Left turn: left tail light, gray/black wire.
Ground: at rear of the car, between tail light and spare wheel well.
12V power: below rear passenger seat, using the big screw connector/cable visible there.
Good luck!
by: David07/20/2023
Functional piece of equipment. Was easy to install.
by: Christopher 07/25/2023
Worked as advertised and easy to install
by: Walt 04/05/2023
Great looking product can't wait for in stallation
25
104
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Trailer Wiring Harness Recommendation for a 1996 Toyota CamryAll of the trailer wiring harnesses for the 1996 Toyota Camry are hardwire harnesses and so for any of them you will need to test the tail light wiring on the vehicle with a circuit tester (included with most harnesses) to determine the functions and then splice the trailer wiring harness to the vehicle accordingly. For your Camry harness # C59496 is a good choice, It does have a 4-Way flat trailer connector that will work with your trailer. I have linked the instructions. This is also...
view full answer... - Flat 4-Pole Wiring Harness for 2003 Buick LeSabreWe do offer a 4-pole wiring harness installation kit for your 2003 Buick LeSabre. You can use # C59496 which includes the powered converter module (that protects the wiring in your LeSabre from overload) as well as the required fuse, connectors and even a circuit tester to make it easier to find the correct wires on your vehicle - everything you need. The module will install behind your driver-side tail light and most of the wiring connections will be made there; the green wire will be...
view full answer... - Recommendation for a Trailer Wiring Harness for a Victory Vision MotorcycleI would recommend using the Upgraded Modulite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector, item # C59496, which includes the all of the wiring needed and a circuit tester to help determine the wires to splice into for the tail light functions. The # C59496 wiring harness is a powered harness that draws only about 5 milliamps from the vehicles tail light circuits and provides power to the towed trailer from the motorcycle battery, protecting the motorcycles sensitive...
view full answer... - Trailer Wiring for 2009 Nissan ArmadaTo add a 4-way to your 2009 Nissan Armada that does not have trailer towing package you'd want the 4-way kit part # C59496.
view full answer... - Trailer Wiring Harness Recommendation for a 2013 VW Jetta TDI SportwagenFor your 2013 Volkswagen Jetta SportWagen I recommend the Curt Wiring Harness part # C59496. This harness would work very well for you. I attached an install video for this wiring kits on similar vehicles as yours for you to check out also.
view full answer... - Trailer Brake Lights Do Not Work After Installing Trailer Wiring on a 2006 Mercedes E350 WagonWhen you tested the tail light wiring to perform the installation did you come across a wire that was just brake but also a wire that was both brake and turn signals? If so then the wire that has both functions would go to the yellow wire on the left side and to the green wire on the right side and the red wire would be grounded with the white wire. You could also try using the brown wire in place of the red wire and ground the red wire. If none of these solutions works then try moving...
view full answer... - Can Curt C59496 be Connected to Power Outlet at Back of a 1999 Lexus RX-300You will not want to connect the power wire for the wiring harness # C59496, to anything other than the battery. The reasons for this are: The kit has not been tested or rated for anything other than a connection to the battery. And connecting it to an alternate power source eliminates that level of circuit protection so the vehicle wiring is not as isolated from the trailer wiring as it would be with the battery connection. Connecting the power wire in any other location would also...
view full answer... - Will the Curt Powered Wiring Harness # C59496 Support LED Trailer LightsYou can certainly upgrade the tail lights on your trailer to LED tail lights. LED tail lights will draw a fraction of the power that incandescent bulbs require which results in less work for the converter of your Curt Powered Wiring Harness, # C59496. There will not be any compatibility issue between the LED trailer lights and the powered wiring harness on your 2011 Volkswagen TDI. I have attached a link to all of our LED tail lights for you to check out. If you would like to send me...
view full answer... - Installation Process for Wiring Harness C59496 on 2006 Cadillac SRXWe have not had the opportunity to produce an installation video for this particular wiring kit on your specific vehicle, the 2006 Cadillac SRX. But I did link a video showing a typical install on a GM vehicle that will give you a good idea of what the installation involves.. Although the install on your vehicle and what's shown in the video will be a little different (wire colors, for instance), the overall process will be the same and each of the various steps outlined in this video will...
view full answer... - Installation of Universal Trailer Wiring Harness C59496 on a 2006 Volvo S60The # C59496 is not a vehicle specific item, so there aren't vehicle specific instructions available for it. However, I'd be happy to walk you though the process. You'll want to locate the wiring harnesses that feed the taillight assemblies. Accessing the rear of the assemblies as if you're changing a burned out bulb is the easiest spot to get to the wiring. Have a helper activate the left turn signal, and probe the wires using the circuit tester included with the kit until you find the...
view full answer... - How to Install Circuit Protected Modulite Wiring Harness C59496 on a 2006 Mercury MontegoThe # C59496 hardwire kit is a universal application, so I have linked the installation instructions below, but they are not going to be specific to your 2006 Mercury Montego. To install the hardwire kit on your vehicle, you would use the included circuit tester to test the wires behind your vehicle tail lights for function. I would have a friend sit at the wheel and press the brake pedal or engage the turn signals as you test each wire behind your tail light. Once you have determined...
view full answer... - Trailer Wiring Harness Recommendation for 2011 Acura TSX Sport WagonWe have had other customers with the TSX Sport Wagon use the # C59496 wiring harness and have not had any complaints. This is a hardwire trailer wiring harness that fits a lot of different vehicles. Because of its versatility, I am confident it will work well for you. I have included a link to the installation instructions for this wiring harness for you. The mechanic may have been referring to pulse width modulation wiring. But, from the research I have done, the Sport Wagon should not...
view full answer... - Installing Universal 4-Way Trailer Harness On 2015 Polaris SlingshotI'm glad to hear the kind words! While we do not offer a custom fit harness for your 2015 Polaris Slingshot you can use the 4-Pole Trailer Connector and Installation Kit # C59496 that will come with all of the required parts to complete the install. This will require splicing into your factory wiring, but I have included an article to help with the installation.
view full answer... - Installing a Universal Trailer Wiring Harness on a 2007 Lexus RX 400hThe Wiring Harness, # C59496, that you purchased is a universal wiring harness that can be installed on many different vehicles. That is why the instructions are generic and not vehicle specific. At this time there are no vehicle specific aftermarket wiring harnesses available for the 2007 Lexus RX 400h. We have not had the chance to install a trailer wiring harness on a Lexus RX 400h yet so I do not have written material or photos, but I can give you some tips on where to find the tail...
view full answer... - Availability of 13-Pin to 4-Pin Adapter for a 2008 Land Rover Configured for European StandardsUnfortunately there is no 13 to 4-pin adapter. You will need to do some splicing to get the correct functions wired to a 4-pin for your trailer. I recommend using the 4-Pole Trailer Connector and Installation Kit # C59496 for your 2008 Land Rover LR2. This kit splices into your vehicle wiring and is powered by running the included Black wire up to your battery. This ensures that your trailer will not be drawing too much power from your Land Rover tail lights. You can use a circuit tester...
view full answer... - Brake Light Troubleshooting with Modu-Lite Wiring HarnessThere are a couple troubleshooting steps we should try out on your # C59496, but I think we can isolate the issue down to one probable cause. First, make sure you're testing the smaller red wire (which connects to your brake lights) for voltage; the larger red wire is going to be the power wire that is connected to the battery. You also need to make sure that your ground is connected firmly to a clean, paint free surface. If you can confirm that these are both the case, the converter is...
view full answer... - Where is the Tail Light Wiring on a 2006 Cadillac SRX to Install a Trailer Wiring HarnessProbably the easiest way to get to the wires to install the trailer wiring harness # C59496 is to pretend as if you were going to have to change out a tail light bulb (or LED panels or bulbs). There is a process to follow to access them. If you do this, it will inevitably show you where the wiring is for the tail light functions. Then use the circuit tester to probe the wires to make the connections. On some vehicles, you actually have to remove the tail light assemblies on the vehicle...
view full answer... - How to Determine The Wires for Installation of a Wiring # C59496 on a 2003 Volvo V70The easiest way to determine which wires to use for installing the Wiring # C59496 would be to locate the wiring harness in the spare tire wheel well and use the included circuit tester to test by function to find the correct wires to use when you install this product.
view full answer... - Recommended 4-Way Trailer Wiring Harness for 1999 Chevy SilveradoFor your 1999 Chevy Silverado, there is a 4-way that can be spliced in behind your tail lights with quick splice connectors, but there is not a T-style connector. For your application I recommend the Vehicle Wiring Harness Kit with 4 Pole Trailer Connector (Includes Install Kit) # C59496. This will install in a very similar way to the T-connectors and will require connection to your battery for power.
view full answer... - No Power on Upgraded Modulite Vehicle Wiring Harness Kit with 4 Pole Trailer Connector 119147The first thing to check is the fuse on the power wire for trailer wiring harness # C59496. If the fuse is blown or not present then it will need to be replaced/installed. Otherwise the converter will not get any power. The ground you are using might not be sufficient. Try moving the ground to a different location that is clean and bare metal. And lastly, make sure that you tested the wires yourself on the vehicle using the included circuit tester. This is the only definitive way to...
view full answer... - Troubleshooting Dim Trailer Lights and Turn Signals Blinking TogetherThe turn signals flashing together indicates a bad ground connection. You will have to check the ground points on each of the lights and on the trailer connector. The lights usually ground through the mounting studs. If there is any dirt, corrosion, or rust it could cause a bad connection. You will also want to check where the light bracket mounts to the trailer. I have included a video below on testing for a ground. If your trailer has a large amount of lights (like running lights along...
view full answer... - Trailer Wiring Harness for 2022 Chevrolet VoltThe 4-Pole Trailer Connector and Installation Kit Item # C59496 does fit a 2022 Chevrolet Volt but I do not have any pictures or installation videos. That wiring harness is a universal harness that fits multiple vehicles such as the 2017 Volt in the question referenced. Searching through our fit guide it does not look like we have any custom wiring harnesses available yet for the 2022 Chevrolet Volts that I could provide you a clear install picture of (Sept 2021). Our team works throughout...
view full answer... - Installing Upgraded Modulite Vehicle Wiring Harness Kit # C59496 on 2012 Toyota PriusFor your 2012 Toyota Prius Plug-In, you will need to use a hardwired converter like the Upgraded Modulite Vehicle Wiring Harness Kit, # C59496. The converter will tap into the factory wiring harnesses for your taillight assemblies. The best place to tap the wiring in would be directly behind the taillight assemblies on your Prius. You will want to use the circuit tester included in the kit to test the wires going into each taillight assembly to determine the function of each circuit. You...
view full answer... - Wireing Harness to Fit a 2016 Mercedes Sprinter 3500 Cab and ChassisFor your 2016 Mercedes Sprinter 3500 cab I recommend a hardwire harness such as # C59496. This is a universal hardwire kit.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Jonathan Y
Video by:
Dustin K
Video by:
Chris R
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Sabrina W
Written by:
Amanda M
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Matthew
5/7/2023
Its been on a year now and I love the ability to pull a 4x8 trailer with my xc70.