Hitch Equipment For 2020 Chrysler Pacifica Hybrid

Question

Question:

Looks like you have several 2inch receivers for this vehicle. My hope is to tow some small boat trails total weight about 1,200 lbs. Do you see any issues with this?

asked by: Eoin H

0

Expert Reply:

It looks like your towing capacity is around 3600 pounds, although you should consult your vehicle's documentation for exact capacity. A 1200 pound boat and trailer should not be a problem. For your hybrid the etrailer e98903 would be a good choice for a Class-3 hitch with 2" receiver. I have attached a link to this product and an installation video on a 2020 Pacifica. I think the matte black finish hides the hitch better and will inhibit rust longer.

You will also need a ball mount and hitch ball to get hitched. If you let me know what size ball the coupler on your trailer needs, I can recommend one. Probably a Curt # C45131 ball mount for 2" receiver that comes with a 1-7/8" hitch ball. To make sure that your hitch does not disappear, you may want to add an etrailer E98882 hitch lock. Also a little Reese # 58117 hitch ball lube keeps things going smooth and quiet, and then a hitch ball cover # FA82-00-3220 keeps you out of the grease and your equipment looking nice.

Finally, if your Pacifica did not come with a hitch, then it unlikely has the 4-pole electrical connector for your trailer lights. These kits are made custom to your specific vehicle. For Touring model you need # 118723, for LX # 118723, for Limited, Touring-L, and Touring-L-Plus # C56322. I have included links below to all of these products and a install video on a 2020 Pacifica. Each of these kits come with the module box included which isolates your vehicle from the trailer wiring which is important protection for your vehicle.

expert reply by: Les D

0

Answer 1

The Curt T-Connector Vehicle Wiring Harness #C56322 is a fit for some 2021 Chrysler Pacifica models but since you have the Hybrid you'll need a splice-in connector like the Curt Powered Tail Light Connector #C59236. This will need to be spliced…

view full answer...

Answer 2

There is a hitch that is a fit for your 2018 Chrysler Pacifica Hybrid Limited, the Curt #C13383. This is a Class III hitch with a 2" receiver, 400 lb tongue weight capacity and 4,000 lb towing capacity. To add a 4-flat wiring harness you would…

view full answer...

Answer 3

In order to tow a trailer with your 2017 Chrysler Pacifica you will need a trailer hitch, wiring harness, and ball mount/hitch ball combo. Based on my research the factory tow package can vary a bit depending on what "group" is selected but…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56322 is a fit for a 2021 Chrysler Pacifica Limited, Touring L, and Touring L Plus. If you're unsure of which sub-model you have then you can reach out to the…

view full answer...

Answer 5

A 4-pole wiring harness that is a confirmed fit for your 2017 Chrysler Pacifica Hybrid is the Curt #C56322. I checked with Curt to be sure this was a fit for the Hybrid version of your vehicle. I've added a link to a video review of this product…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Hitch Equipment For 2020 Chrysler Pacifica Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching