How To Confirm Fit of Curt T-Connector Vehicle Wiring Harness On 2021 Chrysler Pacifica

Question

Question:

Can you please confirm the above info will work for C52622? Thanks

asked by: Dan

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56322 is a fit for a 2021 Chrysler Pacifica Limited, Touring L, and Touring L Plus. If you're unsure of which sub-model you have then you can reach out to the dealer with your VIN but we are not able to look this up for you unfortunately.

expert reply by: Conner L

0

Answer 1

A 4-pole wiring harness that is a confirmed fit for your 2017 Chrysler Pacifica Hybrid is the Curt #C56322. I checked with Curt to be sure this was a fit for the Hybrid version of your vehicle. I've added a link to a video review of this product…

view full answer...

Answer 2

The Curt T-Connector Vehicle Wiring Harness #C56322 is a fit for some 2021 Chrysler Pacifica models but since you have the Hybrid you'll need a splice-in connector like the Curt Powered Tail Light Connector #C59236. This will need to be spliced…

view full answer...

Answer 3

In order to tow a trailer with your 2017 Chrysler Pacifica you will need a trailer hitch, wiring harness, and ball mount/hitch ball combo. Based on my research the factory tow package can vary a bit depending on what "group" is selected but…

view full answer...

Answer 4

There are indeed many variants of the 2019 Chrysler Pacifica and these have the following official model designations: Limited LX Touring Touring L Touring L Plus Touring Plus The "L" appears to be the same wiring fit as the Limited so you…

view full answer...

Answer 5

There is a hitch that is a fit for your 2018 Chrysler Pacifica Hybrid Limited, the Curt #C13383. This is a Class III hitch with a 2" receiver, 400 lb tongue weight capacity and 4,000 lb towing capacity. To add a 4-flat wiring harness you would…

view full answer...

Answer 6

It looks like your towing capacity is around 3600 pounds, although you should consult your vehicle's documentation for exact capacity. A 1200 pound boat and trailer should not be a problem. For your hybrid the etrailer e98903 would be a good…

view full answer...

Answer 7

We do have a trailer wiring harness that is a fit for your 2021 Chrysler Pacifica Touring L model: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56322

view full answer...

Answer 8

Yes, I can confrim for you that the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56399 WILL fit your 2017 Chrysler Pacifica LX. This connector fits both the LX and the Touring models and will work for you.

view full answer...

Answer 9

Your tow rating is your tow rating. You cannot increase it. When you are towing a trailer you are limited to the lowest maximum weight capacity of the system. In this case it does not matter if you add a trailer hitch with a maximum weight limit…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

How To Confirm Fit of Curt T-Connector Vehicle Wiring Harness On 2021 Chrysler Pacifica

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching