etrailer Class III Trailer Hitch Installation - 2020 Chrysler Pacifica Video

Thanks for reaching out! I recommend going with the Curt Hitch Receiver #C65CR for a standard hitch or the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT46GR if you want the option to remove the receiver for a complete OEM look on your 2022…

Installation of the etrailer Hitch part #e98903 on your 2020 Chrysler Pacifica still allows for the hands free liftgate sensor to work but may limit the range of the sensor which may result in you having to put your foot near or around the hitch.…

None of the hitches we offer would install through the bumper like the OEM hitch. The Class III hitch we offer with the largest amount of ground clearance for the Hybrid model would be the Curt #C29UR, which would offer about 10-1/2 inches of…

The etrailer hitch part #e98903 does fit the 2021 Chrysler Pacifica Hybrid. It's listed in two places in our fitguide as fitting the hybrid and non-hybrid models.

The SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-183-54-1 can be installed without removing the wheels on your 2014 Tiffin Allegro Open Road 36LA, but it will be more complicated because of restriction working room. I've attached a…

I have attached a video of the etrailer.com Trailer Hitch Receiver part #e98903 installed on the 2020 Chrysler Pacifica. We do have a video of an install on a 2018 which would be the same as your 2020 Chrysler Pacifica. The underbody panel does need…

The etrailer.com hitch part #e98903 is a confirmed fit for your 2020 Chrysler Pacifica Hybrid and does have a couple extra steps for the hybrid models. There's an emissions canister that needs to be relocated temporarily when installing the hitch…

The Curt Trailer Hitch Receiver part #C13383 is a fit for your 2019 Chrysler Pacifica and the trailer hitch I recommend for you because it has a 2" receiver tube opening and is a custom fit so no drilling is required. The hands free liftgate…

There is a small difference in installing the etrailer.com Trailer Hitch Receiver part #e98903 on a Hybrid compared to a non-hybrid 2021 Chrysler Pacifica. There is an emissions canister on the driver side frame rail that needs to be relocated…

We have all of the parts you need! To be able to tow a trailer with your 2021 Chrysler Pacifica non-hybrid that does not have the tow package you will need a trailer hitch receiver, a vehicle wiring harness, and a ball mount, hitch ball, and hitch…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76046-SK is a great option for a 2019 Chrysler Pacifica Hybrid. It features a bolt-on design, has a hidden crosstube, and an integrated trailer connector mounting bracket if needed. In regards to…

There are no straps included with the Yakima HoldUp 4 Bike Rack , part #Y02443-2. The carrier holds the bikes in place using the upright masts with hooks. The bike does include ratcheting straps for the wheels that help hold the bike in place.