Curt Rockerball C4000047 Pivot Pin Diameter and Cushioning Material

Question

Question:

what is diameter of cross/pivot pin? What is the cushioning material made of?

asked by: Brian A

0

Expert Reply:

According to Curt, the # C40047 RockerBall Shock Absorbing 2 inch trailer ball uses a 9/16 diameter tipvot pin. The cushioning material is polyurethane and the ball has a 7500 lb capacity.

If you click the provided link, you can see a product demonstration video featuring the # C40047 RockerBall.

expert reply by: Mike L

0

Answer 1

The only greaseless hitch balls that are available are from Andersen and do require the Rapid Hitch Adjustable Ball Mounts, which come with greaseless hitch balls. There are no individual greaseless hitch balls that can be had separately. There are…

view full answer...

Answer 2

I looked up the length of your Eagle 1200 cap and found it measures 21 foot 3 inch so for a cover the Adco SFS part #290-12263 would work great.

view full answer...

Answer 3

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

view full answer...

Answer 4

Technically yes, if you were replacing idler hubs, as long as the inner/outer bearing, grease seal AND wheel bolt pattern match, there's nothing that prevents you from using a 3,500 lb axle hub, like #84545BX on a 2,000 lb axle. If the bearings…

view full answer...

Answer 5

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

view full answer...

Answer 6

Sure, if you have a tow bar that attaches to a 2" hitch ball you can use the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047. The RockerBall will function the same as any other hitch ball for that purpose.

view full answer...

Answer 7

2024 models of the Chevy Equinox have the same steps listed as the 2023 models to get the vehicle ready to flat tow: 1. Position the vehicle to be towed and secure it to the towing vehicle. 2. Start the vehicle. 3. If equipped with AWD, engage the…

view full answer...

Answer 8

I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver…

view full answer...

Answer 9

For a made in the USA aluminum ball mount we only have adjustable units like the Flash Secure 2-Ball Mount #DTSTBM6600-2S which includes stainless steel hitch balls as well. The Fulton #F97CR you found as well as the similar Curt #C74WR and Brophy…

view full answer...

Answer 10

For use while towing with your popup camper, the best option would be to use the Anti-Rattle Device for a 2 inch hitch #63232, which you reference. This device will eliminate any additional rattling by pulling the ball mount portion of the hitch to…

view full answer...

Answer 11

The Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 works great to cushion the ride quality of a trailer that has a tongue weight between 200 and 700 lbs like what yours would have so it would be very effective.

view full answer...

Answer 12

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

view full answer...

Curt Rockerball C4000047 Pivot Pin Diameter and Cushioning Material

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching