Review of InfiniteRule Hitch Locks - Standard Pin Lock - 34061071-D Video

I looked up the length of your Eagle 1200 cap and found it measures 21 foot 3 inch so for a cover the Adco SFS part #290-12263 would work great.

According to Curt, the #C40047 RockerBall Shock Absorbing 2 inch trailer ball uses a 9/16 diameter tipvot pin. The cushioning material is polyurethane and the ball has a 7500 lb capacity. If you click the provided link, you can see a product…

I have a solution for you, but the short answer is no, it does not. The Replacement Key for Andersen Hitch Receiver Locks and Locking Adjustment Pins #AM3499-2052 is code specific, so the key will only work on locks with a 2052 code. The codes for…

There is not a maximum tongue weight rating for the Curt SecureLatch Pintle Hook with 2" Ball #CU37FR. That's actually true of ball mounts in general, as they are rated for towing capacity but not tongue weight. The towing capacity…

The Curt SecureLatch Pintle Hook with 2" Ball #CU37FR (48407) requires a hitch ball with a 1-1/4" shank. The collar the shank fits into is 2" tall(see image). We do carry a 2" Replacement Ball #CU67FR as well as a…

I checked with Dutton-Lainson and they do show that up to a 21 foot strap can be used with winch #DL15761. For a strap you can use #DL24251.

According to the folks at Curt, when the #CU37FR and #C48007 pintle hooks are designed and cast, they are not designed to withstand the force they'd be subjected to if they were inverted and used as standard ball mount. You'd be best…

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could…

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light…

When installing a trailer hitch onto your 2013 Ford F-150 that already has a factory hitch on it, The TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2 inch Receivers #TLF1005H is your only option. It has a gross…

The distance from the top of the shank to the bottom of the platform on the B&W Tow & Stow 3-Ball Mount part #BWTS10048B while in the stowed position is 8-1/2". I am not sure where you were measuring from but if you measure…

I went to the warehouse to take some measurements and found that from the top of the receiver to the bottom of the 2-5/16" hitch ball was approximately 10-1/2" for the B&W Tow & Stow 3-Ball Mount with 5" of…