TorkLift SuperTruss Hitch Extensions Installation - 2013 GMC Sierra Video

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used…

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you…

When it comes to higher towing capacities and hitch extensions the Torklift extensions are the only way to go like with the part #TLE1536. So to use this with your 2021 Ram 3500 you would need the Torklift hitch part #TLD1111-30 which fits…

According to Torklift they recommend that the tension on a turnbuckle, like their TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs #TLS9050A should be at 300-ft/lbs to properly secure the camper. This is going to be standard…

The Saris Swing Away Hitch Extender for Bike Racks #SAR36VR has an overall capacity of 250lbs (rack and bikes) so it could technically accommodate two 85lb e-bikes as well as a rack, but the bike racks confirmed to be compatible with this extender…

Hitch extenders can add enough length to give a better turning radius but the problem is that they cut the tongue weight capacity of the hitch by 50 percent. So your best option would be to go with a longer ball mount to gain the extra clearance…

First you will need to select either the TorkLift StableLoad Lower #TLA7311S or TorkLift StableLoad Upper #TLA7200 depending on the type of leaf spring you have. The StableLoad Lower is designed to work on leaf springs where the overload spring is…

The TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" item #TLF1002-30 you referenced does fit your 2007 Ford F-350 Super Duty. It can definitely be part of the solution because that hitch offers you…

As far as the reduction of body roll and sway the #TLA7200 and #TLA7311 will both provide about the same amount of improvement. The difference is that the #TLA7311 allows you to easily unhook the system so that you can go back to the stock ride…

I checked with Torklift and the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs part #TLA7200 which is a fit for a 2008 Ford F-150 features a no-drill application but does require the factory installed upper overload. I have…

With the amount of sag already in your springs and the top overload nearly touching the pads already you will most likely need to start by replacing the springs. With the springs likely being original to the 1993 Chevrolet G30HD they are surely…

The SuperSprings kit you looked at is meant for commercial trucks that have an air suspension, however we can help you with a similar rear axle suspension helper kit for your 2013 Ford F-350 to help with sag and sway from your truck camper's…