Greaseless Trailer Hitch Balls and Ball Mount

Question

Question:

Can you buy a regular ball that has this Self lubricated cap on it. AM3664-2516

asked by: David A

0

Expert Reply:

The only greaseless hitch balls that are available are from Andersen and do require the Rapid Hitch Adjustable Ball Mounts, which come with greaseless hitch balls. There are no individual greaseless hitch balls that can be had separately. There are a number of options from Andersen based on how much rise or drop you need.

- Rapid Hitch Adjustable, Aluminum Ball Mount Kit with 2 Greaseless Balls - 4" Drop or Rise # AM3461

- Rapid Hitch Adjustable Aluminum Ball Mount Kit with 2 Greaseless Balls - 10" Drop, 11" Rise # AM3417

You can also replace your current Rapid Hitch hitch balls with the greaseless balls:

- Rapid Hitch Ball Combo with 2" and 2-5/16" Hitch Balls - Greaseless AlumiBall # AM3435
- Rapid Hitch Ball with 1-7/8" Diameter - Greaseless AlumiBall # AM3452
- Rapid Hitch Ball with 2" Diameter - Greaseless AlumiBall # AM3453
- Rapid Hitch Ball with 2-5/16" Diameter - Greaseless AlumiBall # AM3454

I have added links to video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

According to Curt, the #C40047 RockerBall Shock Absorbing 2 inch trailer ball uses a 9/16 diameter tipvot pin. The cushioning material is polyurethane and the ball has a 7500 lb capacity. If you click the provided link, you can see a product…

view full answer...

Answer 2

There is a re-keying kit we offer for the ball mount part #DTALBM6625 it is part #DTLBM02RK. It comes with new lock cores and a wrench that allows you to remove the lock cores. I attached an install video for the kit that will walk you through the…

view full answer...

Answer 3

I have a perfect solution for you. You will want the Rapid Hitch Ball, part #AM3454. This will replace the dual ball set of your #AM3413 with just a single 2-5/16 inch hitch ball. This way you will be able to keep your ball mount, use it with as much…

view full answer...

Answer 4

My contact at Andersen advised that the Replacement Nylon Cap for Greaseless HardBall Hitch Ball #AM3664-2516 will install by a press-on fit. There is a ridge that will lock the replacement nylon ball into place once you apply the pressure to seat…

view full answer...

Answer 5

The Rapid Hitch Ball #AM3454 you ordered does indeed have a 12,500-lb weight capacity. This is a 2-5/16 inch hitch ball and is designed to work with Rapid Hitch ball mounts.

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to…

view full answer...

Answer 11

Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...