Review of InfiniteRule Ball Mount Lock Set - IR24FR Video

Yes, it will. The etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches item #e98881 will work with both the BulletProof Hitches 2-Ball Mount item #MD206 and your hitch's 3-5/8" wide receiver. To get the etrailer lock keyed alike…

Yes, the Curt locking pins #C23556 will work great for the Curt Adjustable 2-Ball Mount #C45902. I was able to go out to the warehouse and confirm the fit for you.

The raised square plates on shank of the Curt Adjustable 2-Ball Mount part #C45902 are present on older versions of the ball mount but not all. The new version of this ball mount has the smooth shank like you have mentioned. The version of this ball…

I suggest using heat shields #RT76FR with the rock tamers #ERT00108 unless you have an aftermarket tip on your exhaust that makes a complete 90 behind the tire.

Yes, you will be able to use the Curt Adjustable 2-Ball Mount #C45902 with your Rock Tamers on your 2012 Ram 3500. The Curt Ball Mount has two hitch pin holes so use whichever one that leaves a 1 inch gap between your hitch collar and the adjustable…

For Curt adjustable ball mount #C45902 the locking pin set is #C23556. The pins don't have an official capacity but technically 5/8 inch diameter solid steel is going to have a capacity much higher than the hitch or vehicle. The hitch pin has a…

The Rock Tamers Heavy-Duty Adjustable Mud Flap System #ERT00110 will fit on your 2-1/2-inch ball mount so long as you have at least 1-inch of available space (as shown in the linked diagram). In terms of the exhaust you will want to use either the…

We have a heat shield #RT76FR for applications like your 2017 Chevy Silverado 2500 where the exhaust points right at the flap of the part #ERT00108. This would be your ideal solution and would work well.

I looked up the length of your Eagle 1200 cap and found it measures 21 foot 3 inch so for a cover the Adco SFS part #290-12263 would work great.

According to Curt, the #C40047 RockerBall Shock Absorbing 2 inch trailer ball uses a 9/16 diameter tipvot pin. The cushioning material is polyurethane and the ball has a 7500 lb capacity. If you click the provided link, you can see a product…

You actually do not want the weight of the load on a trailer to balance perfectly on either side of the axle. You want more weight forward so that the trailer doesn't sway. What you'll want is 10-15 percent of the total trailer weight as…

The Stainless Steel Hex Lag Screw #FA74521 contains one 3/8" diameter, 1-1/4" long lag screw.