Review of Brophy Trailer Hitch Ball Mount - Fixed Ball Mount - BM10 Video

From side to side, the mounting holes measure 31-1/4 inches apart, center to center. All three sets of holes are the same distance apart. From rear to front, beginning at the rear of the vehicle the distance from the first set of holes to the second…

The trailer hitch options for a 1984 Chevrolet C/K Series Pickup all install in the same manor using holes on the underside of the frame. If there are any brackets present they would need to be removed and are most likely not factory therefore the…

The side brackets of the Curt hitch part #C14082 are 9-3/4 inches long so you'd have the clearance needed to fit this on your frame since you have 10 available inches.

If you don't have the factory tow package on your 2017 Lincoln MKC then you won't have the harness connector for the #HM11140694. Instead you will use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118284 for your…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

WeatherTech does have mudflaps that fit your 2023 Chevy Suburban RST with the part #WT73XJ which is a front and back set. This set fits the versions of your vehicle that do not have the power assist retractable steps whereas the part #WT32TJ is for…

Yes, the K-Source tow mirrors part #KS49NQ are a confirmed fit for your 2023 Chevy Suburban RST model.

For a 2-inch ball mount rated for 12,000-lbs that has 8-inches of drop we offer two options you can see on the linked page. Part #4283 from Draw-Tite provides 7-inches of rise or 8-inches of drop, as does Curt #C45448. Both take a hitch ball, sold…

When determining the amount of rise or drop you will need on the ball mount for your towing setup, you just need to take a couple simple measurements. The first, which you have already taken, is from the ground to the top of the trailer hitch…

For a 6 inch drop ball mount that would fit the 2 inch hitch of your 2019 Subaru Ascent we have the Draw Tite part #40346 and then for a 1-7/8 inch hitch ball you'd want the part #19260 and you'd be set. The Curt ball mount does not have the…

According to Curt, the #C40047 RockerBall Shock Absorbing 2 inch trailer ball uses a 9/16 diameter tipvot pin. The cushioning material is polyurethane and the ball has a 7500 lb capacity. If you click the provided link, you can see a product…

I attached an FAQ for you to check out that details all of this, but what you need to do is get your truck and your trailer on level ground and take a couple measurements. You will need to measure from the ground to the bottom of the coupler on the…