Recommended Multi-Camera RV Observation System for Towing Travel Trailer

Question

Question:

I am looking for the best backup/observation camera for towing my travel trailer. I may need a multi-camera system is to achieve the optimum view for backing and changing lanes while driving. Please suggest a quality system that does not suffer from signal degradation when traveling at 70+ mph. My trailer is wired for a Furrion but it looks like it is limited to a single camera installation.

asked by: Marty M

0

Expert Reply:

For a complete backup/observation camera system for towing your travel trailer you might consider the RVS Backup Camera System, part # RVS-776614-213. This setup includes two side cameras as well as a heavy-duty backup camera. The system has infrared night vision and includes all required cables and installation hardware. Perhaps best of all it includes a large 7-inch display instead of the often-tiny screens found on other systems.

You can refer to the linked video to see the entire kit and more of its features.

expert reply by: Adam R

0

Answer 1

So if you look at the bottom of the mounting brackets on the Camco Fold-Away RV Grab Handle #CAM42175 you'll see a small square shaped hole. If you insert something small into that hole you can depress the latch that holds the cover onto…

view full answer...

Answer 2

The over all diameter on the Valterra Deadbolt Lock part #L32CS3108 is 2 3/8" and it has a 1" Throw bolt. This is a very common size for the doors of campers and rv's. It is designed for doors of varying thickness from 1…

view full answer...

Answer 3

We do have replacement RV Entry Door Handles like the Global Link #295-000019 as well as deadbolts like the Valterra #L32CS3108 with 1" throw, but these are keyed separately as we don't have an all-in-one kit with both locks keyed.…

view full answer...

Answer 4

Based on your information, I recommend the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit, Item #RVS-776614-213. It has two cameras: one for your 2002 Chevrolet Silverado and one for your 28 foot camper trailer. This is a…

view full answer...

Answer 5

Yes, you can use the Redarc 200 watt solar panel with your RV that is pre-wired for solar, but you would not be able to use just the Solar Panel #RED86VR. Solar panels require a charge controller to regulate the battery charge so you would need to…

view full answer...

Answer 6

Curt and B and W make excellent fifth wheel hitches. Since Lippert made your Flexair pin box and they recommended a Curt over a Companion I would make the same recommendation. My favorite Curt fifth wheel hitch is the #C16541 which would work well…

view full answer...

Answer 7

I spoke with my contact at Curt and he said the lowest height possible of the Curt A20 5th Wheel Hitch, #C16541, when used as a slider is 17-1/2 inches, and that the adjustment increments are 2 inches.

view full answer...

Answer 8

I'd be more than happy to help you find the best equipment for 5th wheel towing with your 2020 Ford F-250! For a 5th wheel hitch I recommend using the B&W Companion because it combines 1" dual jaws, a cam-action latching system, and a…

view full answer...

Answer 9

I do have options for you but there would be no way for me to know what type of light bulbs your trailer lights use. For trailer lights there are generally two types which are bayonet or push-in. Most taillights use a 1156 or 1157 bulb like part…

view full answer...

Answer 10

I spoke with a co-worker who has used clip #027-005-00 and he recommends attaching it to metal no thicker than 1/4 inch but that it might work with 3/8 inch thick metal. A better option would be #464600 since it is a little larger and meant for this…

view full answer...

Answer 11

Based on our customer reviews it looks like the Wire Frame Clip #CE16867A that you referenced has better reviews than the Wire Frame Clip #464600. Either one should work fine, but if it were me I would go with the #CE16867A between those two. Another…

view full answer...

Answer 12

Both the #464600 and the #SWC9042-1 wire clips are identical. Both are 1-1/2 inches long x 1/2 inch wide with a 3/8 inch gap for wiring. We also offer a smaller clip as part #SWC9041-1, which is 1-11/16 x1/2 with a 1/4 inch gap.

view full answer...