Difference Between SWC9041-1, SWC9042-1 and 464600 Trailer Frame Wire Clips

Question

Question:

size is same for 464600 and swc 9042: so what isa the difference? Thanks

asked by: Jack C

0

Expert Reply:

Both the # 464600 and the # SWC9042-1 wire clips are identical. Both are 1-1/2 inches long x 1/2 inch wide with a 3/8 inch gap for wiring.

We also offer a smaller clip as part # SWC9041-1, which is 1-11/16 x1/2 with a 1/4 inch gap.

expert reply by: Mike L

0

Jack C.

11/12/2021

If they are identical why does one cost .84 and the other cost 1.84 Thanks Jack

Reply

Les D.

11/16/2021

@JackC they are sourced from two different providers who have different pricing. I prefer parts from Redline when given a choice.

Reply

Answer 1

Based on our customer reviews it looks like the Wire Frame Clip #CE16867A that you referenced has better reviews than the Wire Frame Clip #464600. Either one should work fine, but if it were me I would go with the #CE16867A between those two. Another…

view full answer...

Answer 2

I spoke with a co-worker who has used clip #027-005-00 and he recommends attaching it to metal no thicker than 1/4 inch but that it might work with 3/8 inch thick metal. A better option would be #464600 since it is a little larger and meant for this…

view full answer...

Answer 3

I do have options for you but there would be no way for me to know what type of light bulbs your trailer lights use. For trailer lights there are generally two types which are bayonet or push-in. Most taillights use a 1156 or 1157 bulb like part…

view full answer...

Answer 4

For a complete backup/observation camera system for towing your travel trailer you might consider the RVS Backup Camera System, part #RVS-776614-213. This setup includes two side cameras as well as a heavy-duty backup camera. The system has infrared…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Difference Between SWC9041-1, SWC9042-1 and 464600 Trailer Frame Wire Clips

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching