Weight Distribution for a 2012 Nissan Frontier and 4,000 Pound Trailer

Question

Question:

Hello, Im looking to eventually tow a camper with my 2012 Nissan Frontier V6 that will be roughly around 4000lbs. Which weight distribution system would you recommend to go with this hitch for this purpose?

asked by: John

0

Expert Reply:

For your 2012 Nissan Frontier and trailer hitch # 87539 you will need a weight distribution system that is rated high enough for the total tongue weight of the trailer. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle.

A trailer weighing 4,000 pounds would have a tongue weight around 400 to 600 pounds (10 to 15 percent of the gross trailer weight).

For a good system that covers this whole range I recommend the Fastway e2 # FA94-00-0800 rated for 400 to 800 pounds tongue weight. This system also features built-in sway control. The only other part needed is a ball, # EQ91-00-6100, for a 2-5/16 inch.

I have included some links on weight distribution and determining tongue weight for you.

expert reply by: Michael H

0

Answer 1

Based on your explanation, I think the Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA94-00-1000 will be large a system for your application giving you too stiff a ride. The light tongue weight of your trailer will obviously be slightly…

view full answer...

Answer 2

The tongue weight range of the Fastway e2 weight distribution system #FA94-00-0600 that you referenced is 400 to 600 lbs. 430 lbs of tongue weight does fall into this range but you also have to consider what the trailer tongue weight will be when the…

view full answer...

Answer 3

We have not had any issues with weight distribution systems bending trailer frames. If your trailer happens to have an aluminum frame that could be an issue though. You would need to check with the trailer manufacturer if the frame is aluminum to see…

view full answer...

Answer 4

When a weight distribution system is installed but the trailer is not yet loaded to the actual tongue weight (TW) for which that system is rated, it is not unusual to find a jumpy or choppy ride quality. These systems are tongue-weight-sensitive and…

view full answer...

Answer 5

The Fastway weight distribution system you were referencing, part #FA94-00-0800, requires a minimum 400-lbs tongue weight, and would not work for you but I do have a solution. I recommend the Fastway e2 Weight Distribution System, part #FA92-00-0450.…

view full answer...

Answer 6

Choosing the right weight distribution system will depend on the total tongue weight of your setup. The total tongue weight will include both the loaded tongue weight of your camper plus any added cargo behind the rear axle of your tow vehicle. You…

view full answer...

Answer 7

For 411 lb of tongue weight the 6k rated Fastway e2 systems are the way to go. They have a tongue weight range of 250-600 lbs which your 411 lb tongue weight falls right in the middle of and that's exactly what you want. The trunnion systems like…

view full answer...

Answer 8

The Pro Series Weight Distribution System #49570 is likely too big a system for your trailer. If you want this style system, a better option for you is the similar system rated for 550 to 750 lbs total tongue weight #PS49582. Total tongue weight is…

view full answer...

Answer 9

When it comes to weight distribution, tongue weight is the most important factor. In this case, it doesn't sound like the spring bars need to be swapped out. Although I don't know the exact model of your camper, the tongue weight is going to…

view full answer...

Answer 10

The one important thing to consider when choosing a weight distribution system is actually the tongue weight of your loaded trailer. Typically, your tongue weight will fall between 10-15% of the total loaded weight of your trailer- a good tool to…

view full answer...

Answer 11

The width of the Optronics Flexible LED Light Strip #UCL90CB is about 3/8". I have attached a review video where we take this measurement for you to check out. To help remove the 3M adhesive I recommend using some heat like a hair dryer or…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...