Weight Distribution Recommendation for 3,700 lb Travel Trailer

Question

Question:

I am looking at the Fastaway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW for my 2014 MKX and the trailer guy said that if i use a distribution hitch it could bend my frame is this true or is he blowing smoke ??????it to hall a 3700lb travel trailer

asked by: Jere

0

Expert Reply:

We have not had any issues with weight distribution systems bending trailer frames. If your trailer happens to have an aluminum frame that could be an issue though. You would need to check with the trailer manufacturer if the frame is aluminum to see if that would still be recommended.

If your travel trailer weighed 3,700 lbs the tongue weight would be between 370 and 555 lbs. The FastWay E2 part # FA94-00-0800 would be perfect for that tongue weight range. Especially if you consider the weight behind the rear axle of the tow vehicle as tongue weight as well.

For a hitch ball you would want the # EQ91-00-6100 for a 2-5/16 inch ball or part # EQ91-00-6080 for a 2 inch ball.

expert reply by: Jameson C

0

Answer 1

Choosing the right weight distribution system will depend on the total tongue weight of your setup. The total tongue weight will include both the loaded tongue weight of your camper plus any added cargo behind the rear axle of your tow vehicle. You…

view full answer...

Answer 2

Sounds like you are in need of a weight distribution shank that can do more drop than what came with your FastWay E2 kit part #FA94-00-0800. For that we have the part #FA92-02-4315 which can do drop of up to 8 inches if used with a round bar setup or…

view full answer...

Answer 3

The hitch shank that you currently have, 63970, has been replaced by Reese Hitch Shank #RP54970. This hitch shank will provide 2 inches of drop using round bars and 1-/14 inch drop using trunnion bar on your weight distribution system. The Curt Hitch…

view full answer...

Answer 4

When it comes to weight distribution, tongue weight is the most important factor. In this case, it doesn't sound like the spring bars need to be swapped out. Although I don't know the exact model of your camper, the tongue weight is going to…

view full answer...

Answer 5

Any time you are towing a trailer that has a fully loaded weigh that is over 50 percent of the vehicle's gross weight, a weight distribution system is recommended. If your vehicle weighs less than 6,000 lbs, a weight distribution system and…

view full answer...

Answer 6

The Pro Series Weight Distribution System #49570 is likely too big a system for your trailer. If you want this style system, a better option for you is the similar system rated for 550 to 750 lbs total tongue weight #PS49582. Total tongue weight is…

view full answer...

Answer 7

The one important thing to consider when choosing a weight distribution system is actually the tongue weight of your loaded trailer. Typically, your tongue weight will fall between 10-15% of the total loaded weight of your trailer- a good tool to…

view full answer...

Answer 8

The trick here is to get as close as possible. If you are talking about less than 2 inches or so, there is nothing to worry about. Having the trailer tongue a bit too high is preferable to it being too low. You may be a good candidate for an…

view full answer...

Answer 9

For your 2018 Nissan Pathfinder I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13309 you mentioned as it has a hidden crosstube meaning the only visible part of the hitch is the actual receiver where the…

view full answer...

Answer 10

We have a couple of Fastway weight distribution shanks that could work for you. First we have #FA92-02-4214. It offers up to a 5-1/2 inch drop. For a little bit more adjustability we have #FA92-02-4315 which has a maximum 8 inch drop. The shank that…

view full answer...

Answer 11

Based on your explanation, I think the Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA94-00-1000 will be large a system for your application giving you too stiff a ride. The light tongue weight of your trailer will obviously be slightly…

view full answer...

Answer 12

The Fastway weight distribution system you were referencing, part #FA94-00-0800, requires a minimum 400-lbs tongue weight, and would not work for you but I do have a solution. I recommend the Fastway e2 Weight Distribution System, part #FA92-00-0450.…

view full answer...

Weight Distribution Recommendation for 3,700 lb Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching