Review of Fastway Weight Distribution Hitch - e2 600 LBS TW WD With Sway Control - FA92-00-0600 Video

There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…

I do recommend you use a weight distribution system on the Intech Explore Travel Trailer while towing with your 2018 Toyota Highlander. The reason for this is because the weight of the trailer will be over half the weight of the vehicle which is the…

Based off of the truck weight rating information you have told me, as long as you stay under 650 lbs of tongue weight the truck is capable of towing the 4,700 lb trailer. Using a weight distribution system does not lower the tongue weight of the…

The etrailer Hitch Mounted Spare Tire Carrier #e98ZR that you referenced does not have a stated weight capacity but it would easily handle the weight of an 80 lb wheel and tire in the size of 245/70-19.5 so it would work well for you.

Yes, the dimension you mentioned is the distance from the center of the ball hole on the coupler back on the frame rails 27-30 inches for the Fastway e2 part #FA92-00-0600.

This is a really good question. I sent it to our engineer and he told me that the gauge has a 3%,2%,3% margin of error. This means that in the first third of its range, it is +/- 3% of the actual tongue weight, the middle of its range it is +/- 2%,…

Based on the picture you sent in it looks like you would need a part #MC48AB and #MC48RB as a replacement. This measures 3-29/32" L x 1-27/32" W x 1-1/32" D so you would need to compare that to the light you have. The mounting holes…

With a weight distribution system like the Fastway part # FA92-00-0600 you can back up as long as you back up mainly in a straight line. You want to avoid getting the trailer into too tight of a jackknife situation. Going forward you're totally…

If you're not planning on loading the trailer until you get to a destination, you can either leave the trunion bars of your Fastway e2 #FA92-00-0600 completely off the system or loosen the bars up so that there isn't much tension. Either way…

For your R-pod travel trailer, the biggest issue you will face is sway , so I recommend he Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 600 lbs TW #RP66086 which is rated for total tongue weight between 200 and…

To determine the correct shank for your weight distribution hitch, you need to find the rise or drop you need, just like with a standard ball mount. This is only two measurements - first, measure from the ground to the top of your hitch receiver…

If you are experiencing persistent sway at highway speeds your real issue is most likely trailer loading. You need to move the weight of any cargo forward if at all possible so that the tongue weight is between 10 and 15 percent of the total trailer…