Dimensions of Replacement Rubber Strap for Thule T3 Bike Carrier Cradles # 753-3535

Question

Question:

Can you tell me the dimensions length, diameter of holes of this Thule strap? Thule/753-3535 I could not find this info on your site.

asked by: Alex

0

Expert Reply:

I have attached a picture with all of the dimensions that you requested for the Replacement Rubber Strap for Thule T3 Bike Carrier Cradles, # 753-3535.

Total Length = 10-1/2"
Diameter of Small Holes = 1/2"
Small Hole Spacing = 1" center to center
Large Hole = 1-1/2" x 1"

expert reply by: Leah S

0

click to enlarge

Answer 1

If your integrated cable lock has the rivet on the bottom and not the screw, you will not be able to remove the end piece. However, check out the video on the page I have linked at right. It shows how you can stretch the replacement strap, #753-3535,…

view full answer...

Answer 2

If the cap at the end of the bike rack arm has a rivet instead of a screw to hold it on (check on the bottom of the arm) then you will not be able to remove it. But what you can do to get strap #753-3535 installed is essentially stretch it out enough…

view full answer...

Answer 3

Installation of the T3 cradle replacement strap is pretty straight forward. You will need to remove the end cap from the end of the bike support arm, a Phillips screw typically holds the cap in place. Next use a small amount of soap and water to help…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...