etrailer Trailer Hitch Installation - 2021 Mazda CX-5 Video

I recommend the Curt Trailer Hitch Receiver #C53HR for your 2020 Volvo XC90. This receiver has a hidden cross tube to give a cleaner more OEM look. It is a class 4 receiver with a 2"x2" receiver tube. A maximum tongue weight rating of…

When it comes to which hitch you should install on your 2018 Volvo XC90 I'd recommend The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C53HR. It does have the same similar design as The Draw-Tite 76194. The Curt #C53HR has a…

You do not have to remove the bumper, but you do have to remove the rear fascia and drill into the frame of your 2019 Volvo XC90 to install the etrailer Trailer Hitch Receiver #e53KR. There are no hitches for your XC90 that you can install without…

For the etrailer Hitch #e98902, the only possible trimming you need to do is if the seam seals overhang on the housing locations on your 2021 Mazda CX-5. This is if you do not have a Grand Touring model. If you happen to have the Grand Touring Model,…

In order for you to realize more clearance under your trailer, using torsion axles with down degree angles will give you more clearance. On a system that has a 10 degree up axle, the center line of the spindle to the bottom of the trailer frame is…

To install the etrailer Trailer Hitch Receiver item #e98902 on your 2019 Mazda CX-5 Signature you will need to remove a two foot long L shaped panel that is beneath your vehicle. I have linked a diagram I made as well as an installation video. This…

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13315 is a fit for your 2020 Mazda CX-5 GT. The Grand Touring models have an additional underbody trim piece that will need to be permanently removed for hitch installation. This is…

I can confirm for you that each of the trailer hitches that fit a 2019 Mazda CX-5 absolutely fit your Grand Touring model. The best option is going to be a Class III model with a 2 inch receiver, and the fits are: - Draw-Tite Max-Frame Trailer Hitch…

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

You will need to use a quick splice, item #SWC502905-1, and splice the black wire from the LED Trailer License-Plate Light, item #LPL55CB, into the taillight wire on your trailer. The taillight wire is normally the brown wire, but you should use a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Curt 2" Trailer Hitch Receiver #C13315 is an excellent option for your 2019 Mazda CX-5 and really the only other option available that I would recommend above it is the etrailer.com 2" Trailer Hitch #e98902, and that is only due to the…