Best 2023 Mazda CX-5 Trailer Hitch Options Video

The Hidden Hitch by Draw-Tite Trailer Hitch Receiver part #DT98GR is a confirmed fit for a 2021 Toyota RAV4 Prime. I checked the instructions for you and there are no differences in the installation process for this trim.

To add a hitch to your 2023 Mazda CX-5, I recommend the etrailer Hitch item #e98902. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Mazda with included hardware. I really like this hitch because the crosstube…

If you have a GT 2019 Mazda CX-5 GT model you do have to remove a lower rear panel but there is no trimming or cutting required to install the 76138. If you had a non-GT model there wouldn't be anything that would need to be removed. I attached a…

I have attached a picture with all of the dimensions that you requested for the Replacement Rubber Strap for Thule T3 Bike Carrier Cradles, #753-3535. Total Length = 10-1/2" Diameter of Small Holes = 1/2" Small Hole Spacing = 1" center…

If your integrated cable lock has the rivet on the bottom and not the screw, you will not be able to remove the end piece. However, check out the video on the page I have linked at right. It shows how you can stretch the replacement strap, #753-3535,…

If the cap at the end of the bike rack arm has a rivet instead of a screw to hold it on (check on the bottom of the arm) then you will not be able to remove it. But what you can do to get strap #753-3535 installed is essentially stretch it out enough…

If the cap at the end of the bike rack arm has a rivet instead of a screw to hold it on (check on the bottom of the arm) then you will not be able to remove it. But what you can do to get strap #753-3535 installed is essentially stretch it out enough…

Installation of the T3 cradle replacement strap is pretty straight forward. You will need to remove the end cap from the end of the bike support arm, a Phillips screw typically holds the cap in place. Next use a small amount of soap and water to help…

The best hitch for your 2023 Mazda CX-5 is going to be the Draw-Tite Trailer Hitch item #76138. This hitch is custom fit and bolts to your Mazda with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper and…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The best hitch for your 2023 Mazda CX-5 is the etrailer Hitch item #e98902. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It is made in the USA and has a 4,000 lbs towing…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…